NSN AF43C

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

100-130 v ac single phase 60 hz,84 in. high,29.5 in. interior w,78 in. interior height,top 41.5 in. lg,36 in. wide general characteristics item description.

NSN 6350-01-025-4064 Datasheet

(NSN) National Stock Number

6350-01-025-4064

(FSG) Federal Supply Group

63 - Alarm, Signal and Security Detection Systems

(FSC) Federal Supply Classification

6350 - Security Detection Systems, Signal and Miscellaneous Alarm

(NIIN) National Item Identification Number

01-025-4064

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Sat, Jul 31, 1976

General Characteristics Item Description

100-130 v ac single phase 60 hz,84 in. high,29.5 in. interior w,78 in. interior height,top 41.5 in. lg,36 in. wide

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1184155

Cross Reference

CAGE Codes

28939

Infinetics Inc

U.s./canadian manufacturers

2U819

Security Defense Systems Corp

Non-manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 6350-01-025-4064?

   The FSCG of the NSN 6350-01-025-4064 is 6350

2. Does NSN 6350-01-025-4064 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 6350-01-025-4064 contain precious materials?

   Precious metal content is unknown

4. Does NSN 6350-01-025-4064 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 6350-01-025-4064 was assigned to the Federal Catalog?

   It was assigned 50 years ago, on Sat, Jul 31, 1976