NSN AML22CBS2CC

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

green single actuator actuator color, rectangular actuator style, 0.590 inches nominal actuator width, 0.590 inches nominal actuator length, 0.190 inches nominal actuator height.

NSN 5930-01-312-3428 Datasheet

(NSN) National Stock Number

5930-01-312-3428

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-312-3428

Requires Demilitarization

Yes

(INC) Item Name Code

00406

Date

Thu, Dec 14, 1989

Schedule B Code

8536509035

Actuator Height

0.190 inches nominal

Actuator Length

0.590 inches nominal

Actuator Color

green single actuator

Actuator Style

rectangular

Actuator Width

0.590 inches nominal

Body Height

1.400 inches nominal

Body Length

0.800 inches nominal

Body Style

panel mount

Body Width

0.800 inches nominal

Contact Load Current Rating At Maximum Rated Voltage

2.000 amperes resistive dc and 2.000 amperes resistive ac

Illuminated Actuator Color

unable to decode

Inclosure Type

fully inclosed

Maximum Voltage Rating In Volts

250.0 ac and 24.0 dc

Mounting Method

panel

Nonpile-Up Contact Arrangement

unable to decode

Overall Height

1.950 inches nominal

Overall Length

0.800 inches nominal

Overall Width

0.800 inches nominal

Special Features

actuator illuminated by light emitting diode

Precious Material And Location

contacts silver

Terminal Type And Quantity

14 quick disconnect, male

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000406

Cross Reference

CAGE Codes

91929

Honeywell International Inc. Dba Honeyweel Sensing & Controls

U.s./canadian manufacturers

56996

Department of the Army Hq United States Army Communications Research and Development Command

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9035

Description

switches, push-button, rated at over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-312-3428?

   The FSCG of the NSN 5930-01-312-3428 is 5930

2. Does the NSN 5930-01-312-3428 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509035

3. Does NSN 5930-01-312-3428 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-312-3428 contain precious materials?

   Item contains silver.

5. Does NSN 5930-01-312-3428 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-312-3428 was assigned to the Federal Catalog?

   It was assigned 36 years ago, on Thu, Dec 14, 1989