NSN AUM16H

A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see gearshaft (as modified). For items designed to support rotating members see axle(1), straight. For items not having the above conditions see pin, straight, headless. For items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.

continuous attenuation variation method, 1 slotted screw adjustment device type and quantity, irregular body style, sma coaxial connector series designation, transmission line application design.

NSN 5985-01-172-7315 Datasheet

(NSN) National Stock Number

5985-01-172-7315

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

01-172-7315

Requires Demilitarization

Yes

(INC) Item Name Code

00838

Date

Fri, Feb 24, 1984

Schedule B Code

8529109000

Adjustment Device Type And Quantity

1 slotted screw

Application Design

transmission line

Attenuation Variation Method

continuous

Body Style

irregular

Coaxial Connector Series Designation

sma

Distance Between Mounting Facility Centers

1.545 inches minimum and 1.575 inches maximum

Frequency Range

7.000 gigahertz minimum and 11.000 gigahertz maximum

Impedance Rating In Ohms

50.0 input-output

Insertion Loss At Minimum Attenuation In Maximum Decibels

0.5

Mounting Facility Nominal Screw Thread Diameter

0.086 inches

Mounting Facility Pattern

two position in-line

Mounting Facility Screw Thread Series Designator

unified national coarse (unc)

Mounting Facility Type And Quantity

2 threaded hole(s)

Mounting Thread Quantity

56 per inch

Overall Attenuation Accuracy In Decibels

-5.00 to 5.00

Overall Attenuation Range In Decibels

+0.0 to 15.0

Overall Height

0.500 inches nominal

Overall Length

2.480 inches minimum and 2.540 inches maximum

Overall Width

1.945 inches nominal

Power Rating

2.0 watts average

Terminal Type And Quantity

2 connector, coaxial, female

Voltage Standing Wave Ratio

1.50

Identification

Demilitarization Code

B - Usml items - mutilation to the point of scrap required worldwide. (note 7).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000838

Cross Reference

CAGE Codes

93346

Caes Systems Llc

U.s./canadian manufacturers

05869

Raytheon Company Div Rmd Strategic

U.s./canadian manufacturers

00929

Microlab/fxr Llc

U.s./canadian manufacturers

12457

Merrimac Industries, Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34580

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061700

Schedule B & Trade

Schedule B

8529-10-9000

Description

antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8524 to 8528, nesoi

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76493

(NAICS) North American Industrial Classification System

334220

Questions & Answers

1. What is the FSCG of the NSN 5985-01-172-7315?

   The FSCG of the NSN 5985-01-172-7315 is 5985

2. Does the NSN 5985-01-172-7315 have a Schedule B code assigned?

   Yes, the Schedule B code is 8529109000

3. Does NSN 5985-01-172-7315 require demilitarization?

   Usml items - mutilation to the point of scrap required worldwide. (note 7).

4. Does NSN 5985-01-172-7315 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5985-01-172-7315 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-01-172-7315 was assigned to the Federal Catalog?

   It was assigned 42 years ago, on Fri, Feb 24, 1984