NSN B1617

A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.

makes before breaks first section front contact switching action, makes before breaks third section rear contact switching action, makes before breaks second section rear contact switching action, makes before breaks fourth section front contact switching action, 4 individual section quantity.

NSN 5930-00-577-8676 Datasheet

(NSN) National Stock Number

5930-00-577-8676

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-577-8676

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Tue, Jan 1, 1963

Contact Switching Action

makes before breaks first section front

Contact Switching Action

makes before breaks fourth section front

Contact Switching Action

makes before breaks second section rear

Contact Switching Action

makes before breaks third section rear

Individual Section Quantity

4

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Style Designator

circular wafer, bushing mount

Switch Actuator Positioning Increment

30.0 degrees single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Thread Length

0.250 inches nominal single mounting facility

Thread Series Designator

unef single mounting facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

76854

Electro Switch Corp. Dba Oak Grisgsby Div Electroswitch

U.s./canadian manufacturers

A00AM

E.c.a Etablissement Central des Approvisionnements des Forces Armees Royales

Military standards and standards organizations (ex:stanags,milspecs,defstans)

33604

Excelitas Technologies Corp

Non-manufacturers

90536

Lockheed Martin Corp Dba Lockheed Martin Div Mst - Eagan

U.s./canadian manufacturers

91820

Jetronic Industries, Inc. Dba Jetronic Industries, Inc. Div Contracts

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Questions & Answers

1. What is the FSCG of the NSN 5930-00-577-8676?

   The FSCG of the NSN 5930-00-577-8676 is 5930

2. Does NSN 5930-00-577-8676 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5930-00-577-8676 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5930-00-577-8676 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5930-00-577-8676 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963