NSN B1900-253

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

0.562 inches nominal distance from end to nearest bend, 1.343 inches nominal length, 0.218 inches nominal distance from end to hole nearest loop, 0.015 inches nominal material thickness, 0.130 inches nominal hole diameter.

NSN 5340-00-061-3172 Datasheet

(NSN) National Stock Number

5340-00-061-3172

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-061-3172

Requires Demilitarization

Yes

(INC) Item Name Code

20815

Date

Tue, Jan 1, 1963

Schedule B Code

7326908630

Distance From End To Hole Nearest Loop

0.218 inches nominal

Distance From End To Nearest Bend

0.562 inches nominal

Hole Diameter

0.130 inches nominal

Length

1.343 inches nominal

Material Thickness

0.015 inches nominal

Material

unable to decode

Overall Height

0.437 inches nominal

Surface Treatment

Width

0.250 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020815

Cross Reference

CAGE Codes

19203

Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Us Army Research, Development and Engineering Command Armament

Government departments or units, including military organizations

82240

Simmons Fastener Corp an Amfast Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49780

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

094220

Schedule B & Trade

Schedule B

7326-90-8630

Description

hangers and similar supports for tubes and pipes, of iron or steel

End Use

12300 - Finished metal shapes

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69969

(NAICS) North American Industrial Classification System

332999

Questions & Answers

1. What is the FSCG of the NSN 5340-00-061-3172?

   The FSCG of the NSN 5340-00-061-3172 is 5340

2. Does the NSN 5340-00-061-3172 have a Schedule B code assigned?

   Yes, the Schedule B code is 7326908630

3. Does NSN 5340-00-061-3172 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-00-061-3172 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5340-00-061-3172 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-00-061-3172 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963