NSN B4036765

An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes:straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.

solid single or composition cross-sectional shape style, 14.510 inches nominal aperture width, 0.125 inches nominal cross-sectional thickness, 36 bolt hole quantity, 23.140 inches nominal aperture length.

NSN 5330-01-415-5256 Datasheet

(NSN) National Stock Number

5330-01-415-5256

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5330 - Packing and Gasket Materials

(NIIN) National Item Identification Number

01-415-5256

Requires Demilitarization

Yes

(INC) Item Name Code

04522

Date

Thu, Jun 29, 1995

Aperture Width

14.510 inches nominal

Aperture Length

23.140 inches nominal

Bolt Hole Quantity

36

Cross-Sectional Shape Style

solid single or composition

Cross-Sectional Thickness

0.125 inches nominal

Hole Diameter

0.228 inches nominal

Material

unable to decode

Overall Length

24.500 inches nominal

Overall Width

15.870 inches nominal

Special Features

slots 0.228 inch dia wide may be used in place of holes 0.228 inch dia

Style Designator

non-circular

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0004522

Cross Reference

CAGE Codes

56996

Department of the Army Hq United States Army Communications Research and Development Command

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

95100

Water Commodity

596 - Gaskets, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

194120

Questions & Answers

1. What is the FSCG of the NSN 5330-01-415-5256?

   The FSCG of the NSN 5330-01-415-5256 is 5330

2. Does NSN 5330-01-415-5256 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5330-01-415-5256 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5330-01-415-5256 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5330-01-415-5256 was assigned to the Federal Catalog?

   It was assigned 31 years ago, on Thu, Jun 29, 1995