NSN B86739

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

unable to decode contact position arrangement style, bayonet pin connector locking method, straight shape, external coupling body style, unable to decode contact material, round bushing accommodation hole shape.

NSN 5935-01-073-0794 Datasheet

(NSN) National Stock Number

5935-01-073-0794

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-073-0794

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Thu, Mar 8, 1979

Schedule B Code

8538907080

Body Style

straight shape, external coupling

Bushing Accommodation Hole Shape

round

Connector Locking Method

bayonet pin

Contact Material

unable to decode

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Surface Treatment

Distance From Mounting Shoulder To Front Face

0.915 inches nominal

Environmental Protection

moisture proof and salt water resistant and vibration proof

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Position In Deg

0.0

Mating End Quantity

1

Mounting Facility Thickness

0.062 inches minimum and 0.125 inches maximum

Nominal Thread Length

0.219 inches

Nominal Thread Size

0.812 inches and 1.125 inches

Overall Diameter

1.625 inches nominal

Overall Length

1.248 inches maximum

Polarization Method

key, multiple key groove

Precious Material And Location

contact surfaces gold and contact surfaces silver

Precious Material

gold and silver

Precious Material And Weight

0.025 gold grains, troy and 0.025 silver grains, troy

Shell Surface Treatment Document And Classification

qq-p-416 fed spec single treatment response

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium

Shell Type

solid

Specification/Standard Data

96906-ms27468 government standard

Terminal Location

unable to decode

Terminal Type

unable to decode

Test Data Document

"81349-mil-c-38999 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2a

Thread Direction

right-hand

Thread Quantity Per Inch

20 and 18

Thread Series Designator

unef

Threaded Device Type

back shell and mounting bushing

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

C - Item contains combination of two or more precious metals (silver, gold, platinum).

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

K0967

Mbda Uk Ltd

Non-us manufacturer (nato), other foreign organization or codification bureaus

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-073-0794?

   The FSCG of the NSN 5935-01-073-0794 is 5935

2. Does the NSN 5935-01-073-0794 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-073-0794 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-073-0794 contain precious materials?

   Item contains combination of two or more precious metals (silver, gold, platinum).

5. Does NSN 5935-01-073-0794 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-073-0794 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Thu, Mar 8, 1979