NSN BA433398

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

round pin single mating end single contact grouping included contact type, nonremovable single mating end single contact grouping contact removability, plastic single mating end insert material, 2 single mating end single contact grouping included contact quantity, internally threaded coupling nut connector locking method.

NSN 5935-00-549-4614 Datasheet

(NSN) National Stock Number

5935-00-549-4614

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-549-4614

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Tue, Jan 1, 1963

Schedule B Code

8536695050

Connector Locking Method

internally threaded coupling nut

Contact Removability

nonremovable single mating end single contact grouping

Included Contact Quantity

2 single mating end single contact grouping

Included Contact Type

round pin single mating end single contact grouping

Insert Material

plastic single mating end

Mating End Quantity

1

Nominal Thread Size

0.625 inches

Shell Material

copper alloy

Thread Direction

right-hand

Thread Quantity Per Inch

27

Thread Series Designator

uns

Threaded Device Type

coupling facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

64959

American Telephone and Telegraph Co

U.s./canadian manufacturers

01714

Lucent Technologies Inc Advanced Technology Systems

Non-manufacturers

07263

Fairchild Semiconductor Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-00-549-4614?

   The FSCG of the NSN 5935-00-549-4614 is 5935

2. Does the NSN 5935-00-549-4614 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-00-549-4614 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-549-4614 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-00-549-4614 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-549-4614 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963