NSN BC22P301

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.068 inches minimum and 0.088 inches maximum material thickness, material, unable to decode material document and classification, 0.252 inches minimum and 0.260 inches maximum hole diameter, 0.521 inches minimum and 0.541 inches maximum outside diameter.

NSN 5310-00-596-1766 Datasheet

(NSN) National Stock Number

5310-00-596-1766

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5310 - Nuts and Washers

(NIIN) National Item Identification Number

00-596-1766

Requires Demilitarization

Yes

(INC) Item Name Code

15933

Date

Tue, Jan 1, 1963

Schedule B Code

7318220000

Hole Diameter

0.252 inches minimum and 0.260 inches maximum

Material Document And Classification

unable to decode

Material

Material Thickness

0.068 inches minimum and 0.088 inches maximum

Outside Diameter

0.521 inches minimum and 0.541 inches maximum

Recess Diameter

0.334 inches minimum and 0.344 inches maximum

Recess Angle

89.0 degrees minimum and 91.0 degrees maximum

Style Designator

recessed

Surface Treatment Document And Classification

unable to decode

Surface Treatment

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0015933

Cross Reference

CAGE Codes

80205

National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

78062

Sargent Aerospace & Defense, Llc Dba Sargent Controls & Aerospace Div Sargent Controls & Aerospace

U.s./canadian manufacturers

9009H

Jednolity Indeks Materialowy - Uniform Material Index

Government departments or units, including military organizations

32345

Defense Reduction Agency

U.s./canadian manufacturers

S4080

Pilatus Aircraft Ltd

Non-us manufacturer (nato), other foreign organization or codification bureaus

59310

Abb Kent-Taylor Inc

U.s./canadian manufacturers

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

A0126

Leonardo Spa Helicopters Division - Production Site

Non-us manufacturer (nato), other foreign organization or codification bureaus

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

U - 50.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

55210

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

194160

Schedule B & Trade

Schedule B

7318-22-0000

Description

washers other than lock washers, iron or steel

End Use

12300 - Finished metal shapes

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69422

(NAICS) North American Industrial Classification System

332722

Questions & Answers

1. What is the FSCG of the NSN 5310-00-596-1766?

   The FSCG of the NSN 5310-00-596-1766 is 5310

2. Does the NSN 5310-00-596-1766 have a Schedule B code assigned?

   Yes, the Schedule B code is 7318220000

3. Does NSN 5310-00-596-1766 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5310-00-596-1766 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5310-00-596-1766 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5310-00-596-1766 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963