NSN BL718031

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.152 inches nominal diameter, 3.125 inches nominal loop length, 1.844 inches nominal center to center distance between loop and mounting hole, 1.656 inches nominal loop width, 1.938 inches nominal distance from loop center to tongue end.

NSN 5340-00-760-7899 Datasheet

(NSN) National Stock Number

5340-00-760-7899

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-760-7899

Requires Demilitarization

Yes

(INC) Item Name Code

17532

Date

Mon, Jan 1, 1962

Center To Center Distance Between Loop And Mounting Hole

1.844 inches nominal

Diameter

0.152 inches nominal

Distance From Loop Center To Tongue End

1.938 inches nominal

Loop Width

1.656 inches nominal

Loop Length

3.125 inches nominal

Material Document And Classification

unable to decode

Material Thickness

0.030 inches nominal

Material

unable to decode

Overall Width

0.313 inches nominal

Style Designator

multiple loop

Surface Treatment

unable to decode

Tongue Hole Type

round, unthreaded

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9I - Defense industrial supply center philadelphia, pennsylvania 19111

Pseudo Item Name Code

0017532

Cross Reference

CAGE Codes

19200

Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate

Government departments or units, including military organizations

01714

Lucent Technologies Inc Advanced Technology Systems

Non-manufacturers

64959

American Telephone and Telegraph Co

U.s./canadian manufacturers

70408

At and T Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

S - 60.0

National Motor Freight Class Rating

S - 60.0

Rail Variation

1

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34370

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061200

Questions & Answers

1. What is the FSCG of the NSN 5340-00-760-7899?

   The FSCG of the NSN 5340-00-760-7899 is 5340

2. Does NSN 5340-00-760-7899 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-00-760-7899 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5340-00-760-7899 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-00-760-7899 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962