NSN BLDRW17N

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.531 inches nominal distance between centerlines of mounting facilities parallel to body width, 1.334 inches maximum overall width.

NSN 5935-01-339-5431 Datasheet

(NSN) National Stock Number

5935-01-339-5431

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-339-5431

Requires Demilitarization

Yes

(INC) Item Name Code

15092

Date

Thu, May 23, 1991

Schedule B Code

8548900100

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.531 inches nominal

Overall Width

1.334 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015092

Cross Reference

CAGE Codes

0D0V6

Cooper Interconnect, Inc. Div Interconnect

U.s./canadian manufacturers

99447

Cooper Interconnect, Inc. Dba Cooper Interconnect Div Interconnect

U.s./canadian manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 5935-01-339-5431?

   The FSCG of the NSN 5935-01-339-5431 is 5935

2. Does the NSN 5935-01-339-5431 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-01-339-5431 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-339-5431 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-01-339-5431 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-339-5431 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Thu, May 23, 1991