NSN BML60405

A rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of connecting link,rigid; wire rope assembly,single leg; and clevis,rod end; and the like. Excludes:arm (as modified); lever,remote control; and bell crank.

7.000 inches nominal center section height, 2530-01-110-4660 carrier, ammunition end item identification, 15.000 inches nominal center section width, 0.250 inches nominal center section thickness, 90.0 degrees nominal first leg angle.

NSN 5340-01-184-4953 Datasheet

(NSN) National Stock Number

5340-01-184-4953

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-184-4953

Requires Demilitarization

Yes

(INC) Item Name Code

20354

Date

Wed, Jul 18, 1984

End Item Identification

2530-01-110-4660 carrier, ammunition

Center Section Height

7.000 inches nominal

Center Section Thickness

0.250 inches nominal

Center Section Width

15.000 inches nominal

First Leg Angle

90.0 degrees nominal

First Leg Thickness

0.250 inches nominal

First Leg Width

15.000 inches nominal

First Leg Length

3.000 inches nominal

Material Document And Classification

astm a575, grade -1010 assn std single material response

Material

steel

Second Leg Angle

90.0 degrees nominal

Second Leg Thickness

0.250 inches nominal

Second Leg Width

15.000 inches nominal

Second Leg Length

3.750 inches nominal

Special Features

outer radius where top left flange joins web flange 0.750 in.; outer radius where bottom right flange joins web flange 0.750 in.; fillet radius where top left flange joins web flange/leg 0.500 in.; fillet radius where bottom right flange joins web flange/leg 0.500 in.

Style Designator

double angle

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020354

Cross Reference

CAGE Codes

19207

U S Army Tank Automotive Command Amsta-Im-Mm

Government departments or units, including military organizations

06085

Bae Systems Land & Armaments L.p.

U.s./canadian manufacturers

076M6

Amz Alabama Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

Q - 70.0

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 5340-01-184-4953?

   The FSCG of the NSN 5340-01-184-4953 is 5340

2. Does NSN 5340-01-184-4953 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-01-184-4953 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5340-01-184-4953 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-01-184-4953 was assigned to the Federal Catalog?

   It was assigned 42 years ago, on Wed, Jul 18, 1984