NSN C2011MODIFIED

An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. Excludes:bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.

unable to decode contact load current rating, deactuation point not adjustable and actuation point not adjustable contact adjustability, increase contact action stimulus, 1.562 inches nominal body length, 60.00 actuation point nominal pounds per square inch absolute and 56.00 deactuation point nominal pounds per square inch absolute and 4.00 differential point nominal pounds per square inch absolute contact stimulus rating.

NSN 5930-00-837-8059 Datasheet

(NSN) National Stock Number

5930-00-837-8059

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-837-8059

Requires Demilitarization

Yes

(INC) Item Name Code

00206

Date

Mon, Jan 1, 1962

Schedule B Code

8536509065

Body Length

1.562 inches nominal

Contact Action Stimulus

increase

Contact Adjustability

deactuation point not adjustable and actuation point not adjustable

Contact Load Current Rating

unable to decode

Contact Stimulus Rating

60.00 actuation point nominal pounds per square inch absolute and 56.00 deactuation point nominal pounds per square inch absolute and 4.00 differential point nominal pounds per square inch absolute

Contact Voltage Rating In Volts

unable to decode

Features Provided

hermetically sealed case

Frequency In Hertz

unable to decode

Hazardous Locations/Environmental Protection

dripproof

Media For Which Designed

gas or liquid

Mounting Method

threaded hole(s)

Nominal Thread Size

unable to decode

Nonpile-Up Contact Arrangement

1 pole, single throw, normally closed, momentary action

Operating Temp Rating

0.0 celsius minimum and 50.0 celsius maximum

Overall Diameter

1.312 inches nominal

Overall Length

2.656 inches nominal

Pressure Switch Type

absolute

Style Designator

cylindrical

Terminal Type

connector, receptacle

Thread Class

unable to decode

Thread Series Designator

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000206

Cross Reference

CAGE Codes

21877

Northrop Grumman Systems Corporation

U.s./canadian manufacturers

87557

Lockheed Corp Lockheed Electronics Co Inc

U.s./canadian manufacturers

08664

Bristol Babcock Inc Instruments-Systems Div Sub of Babcock Intl Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9065

Description

switches, for a voltage not exceeding 1000 volts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-837-8059?

   The FSCG of the NSN 5930-00-837-8059 is 5930

2. Does the NSN 5930-00-837-8059 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509065

3. Does NSN 5930-00-837-8059 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-837-8059 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-837-8059 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-837-8059 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962