NSN C2139-4

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

straight shape, internal coupling body style, copper alloy single mating end single contact grouping contact material, 24-61 single mating end contact position arrangement style, removable single mating end single contact grouping contact removability, 7.5 single mating end single contact grouping contact maximum current rating in amps.

NSN 5935-01-240-4104 Datasheet

(NSN) National Stock Number

5935-01-240-4104

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-240-4104

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Sat, Sep 13, 1986

Schedule B Code

8536695050

Body Style

straight shape, internal coupling

Contact Material

copper alloy single mating end single contact grouping

Contact Removability

removable single mating end single contact grouping

Contact Maximum Current Rating In Amps

7.5 single mating end single contact grouping

Contact Position Arrangement Style

24-61 single mating end

Contact Surface Treatment Document And Classification

mil-g-45204,ty 2,cl 2 mil spec single treatment response single mating end single contact grouping

Contact Surface Treatment

gold single mating end single contact grouping

Environmental Protection

moisture proof and pressure proof and vibration proof

Included Contact Quantity

61 single mating end single contact grouping

Included Contact Type

round socket single mating end single contact grouping

Insert Position In Deg

0.0

Mating End Quantity

1

Nominal Thread Size

1.438 inches

Overall Diameter

1.760 inches maximum

Polarization Method

keyway or multiple keyway

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.061 gold grains, troy

Shell Material Document And Classification

qq-a-367,t-6 fed spec single material response

Shell Material

aluminum alloy 6061

Shell Surface Treatment Document And Classification

mil-a-8625 mil spec single treatment response

Shell Surface Treatment

anodize

Shell Type

solid

Specification/Standard Data

96906-ms24266 government standard

Terminal Location

back single mating end single contact grouping

Terminal Type

crimp single mating end single contact grouping

Test Data Document

"81349-mil-c-265000 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2a

Thread Direction

right-hand

Thread Quantity Per Inch

18

Thread Series Designator

unef

Threaded Device Type

back shell

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

77820

Amphenol Corp Div Amphenol Aerospace Operations

U.s./canadian manufacturers

02660

Amphenol Corp Spectra-Strip/itd

U.s./canadian manufacturers

81755

Lockheed Martin Corporation Div Lockheed Martin Aeronautics Company

U.s./canadian manufacturers

13556

Labinal Components and Systems Inc Cinch Military Aerospace Div

U.s./canadian manufacturers

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-01-240-4104?

   The FSCG of the NSN 5935-01-240-4104 is 5935

2. Does the NSN 5935-01-240-4104 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-01-240-4104 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-240-4104 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-240-4104 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-240-4104 was assigned to the Federal Catalog?

   It was assigned 40 years ago, on Sat, Sep 13, 1986