NSN C37C331G

A resilient metal item, circular or nearly circular, which is designed to be inserted into an internal or external groove and retained by its own spring action, or it may have external prongs or projections designed to be inserted into a hole and retained by spring action of the prongs which grip by imbedding into the material. For items having internal prongs which perform the same function, see push on nut. It is used to keep and/or lock a part(s) in position, as a ball bearing on a shaft or in a housing. See also clip, retaining and pin, lock. Excludes:ring, connecting, round.

0.200 inches nominal body length, w/o mtg facilities terminal(s) on one surface body style, 0.100 inches nominal body height, 0.200 inches nominal body width, 330.000 picofarads single section capacitance value per section.

NSN 5910-01-007-6336 Datasheet

(NSN) National Stock Number

5910-01-007-6336

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-007-6336

Requires Demilitarization

Yes

(INC) Item Name Code

00007

Date

Sat, Aug 9, 1975

Schedule B Code

8532290040

Body Height

0.100 inches nominal

Body Length

0.200 inches nominal

Body Width

0.200 inches nominal

Body Style

w/o mtg facilities terminal(s) on one surface

Capacitance Value Per Section

330.000 picofarads single section

Center To Center Distance Between Terminals Parallel To Length

0.200 inches nominal

Insulation Resistance At Reference Temp

100000.0 megohms

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

50.0 dc single section

Power Factor At Reference Temp In Percent

0.1000

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius

0.0 single section

Terminal Diameter

0.025 inches nominal

Terminal Length

1.250 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Range Per Section

-2.00 to 2.00 percent single section

Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius

-30.0 to 30.0 single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000007

Cross Reference

CAGE Codes

81413

Bae Systems Information and Electronic Systems Integration Inc. Dba Bae Systems

U.s./canadian manufacturers

72982

Erie Specialty Products Inc

U.s./canadian manufacturers

16546

Mepco/centralab a North American Philips Co

U.s./canadian manufacturers

93958

Republic Electronics Corp S Inc

U.s./canadian manufacturers

99515

Electron Products Inc

U.s./canadian manufacturers

95275

Vitramon Inc Po Box 544 Bridgeport Ct 06601

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-007-6336?

   The FSCG of the NSN 5910-01-007-6336 is 5910

2. Does the NSN 5910-01-007-6336 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-007-6336 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-007-6336 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-01-007-6336 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-007-6336 was assigned to the Federal Catalog?

   It was assigned 51 years ago, on Sat, Aug 9, 1975