NSN C6216B

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.755 inches maximum body length, monolithic and positive outputs and w/decoded output features provided, 1 decoder, binary coded decimal to decimal design function and quantity, 0.245 inches minimum and 0.250 inches maximum body width, 0.125 inches maximum body height.

NSN 5962-00-090-7226 Datasheet

(NSN) National Stock Number

5962-00-090-7226

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5962 - Electronic Microcircuits

(NIIN) National Item Identification Number

00-090-7226

Requires Demilitarization

Yes

(INC) Item Name Code

31779

Date

Sun, Nov 19, 1972

Schedule B Code

8542900000

Body Height

0.125 inches maximum

Body Length

0.755 inches maximum

Body Width

0.245 inches minimum and 0.250 inches maximum

Design Function And Quantity

1 decoder, binary coded decimal to decimal

Features Provided

monolithic and positive outputs and w/decoded output

Inclosure Configuration

dual-in-line

Inclosure Material

plastic

Input Circuit Pattern

4 input

Maximum Power Dissipation Rating

105.0 milliwatts

Operating Temp Range

-20.0 to 75.0 celsius

Output Logic Form

transistor-transistor logic

Storage Temp Range

-55.0 to 125.0 celsius

Terminal Surface Treatment

solder

Terminal Type And Quantity

16 printed circuit

Test Data Document

16152-24001110 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Time Rating Per Chacteristic

30.00 nanoseconds maximum propagation delay time, low to high level output and 20.00 nanoseconds maximum propagation delay time, high to low level output

Voltage Rating And Type Per Characteristic

7.0 volts maximum power source

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0031779

Cross Reference

CAGE Codes

16152

Digitec Corp

U.s./canadian manufacturers

66696

Mts Microelectronics, Inc Dba M T S Micro Electronics

U.s./canadian manufacturers

18324

Philips Semiconductors Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

3 - Electrostatic sensitive device (esd)

Uniform Freight Classification Item Number

34580

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061700

Schedule B & Trade

Schedule B

8542-90-0000

Description

electronic integrated circuits and microassembly parts

End Use

21320 - Semiconductors

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77689

(NAICS) North American Industrial Classification System

334413

Questions & Answers

1. What is the FSCG of the NSN 5962-00-090-7226?

   The FSCG of the NSN 5962-00-090-7226 is 5962

2. Does the NSN 5962-00-090-7226 have a Schedule B code assigned?

   Yes, the Schedule B code is 8542900000

3. Does NSN 5962-00-090-7226 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 5962-00-090-7226 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5962-00-090-7226 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5962-00-090-7226 was assigned to the Federal Catalog?

   It was assigned 53 years ago, on Sun, Nov 19, 1972