NSN C746516-2

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

unable to decode center to center distance between mounting facilities parallel to length, 1 coil quantity, salt spray resistant and hermetic environmental protection, continuous duty type, inert gas arc quenching method.

NSN 5945-00-295-6674 Datasheet

(NSN) National Stock Number

5945-00-295-6674

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5945 - Relays and Solenoids

(NIIN) National Item Identification Number

00-295-6674

Requires Demilitarization

Yes

(INC) Item Name Code

32512

Date

Tue, Jan 1, 1963

Schedule B Code

8536490050

Arc Quenching Method

inert gas

Center To Center Distance Between Mounting Facilities Parallel To Length

unable to decode

Coil Quantity

1

Duty Type

continuous

Environmental Protection

salt spray resistant and hermetic

Main Contact Load Current Rating At Maximum Rated Voltage

unable to decode

Main Contact Maximum Voltage Rating In Volts

115.0 ac

Mounting Facility Pattern

unable to decode

Mounting Facility Type And Quantity

2 threaded stud(s) single mounting facility

Nominal Operating Current Rating And Type

unable to decode

Nominal Thread Size

unable to decode

Nonpile-Up Main Contact Arrangement

2 pole, double throw, one position momentary

Operating Voltage Rating And Type At Specified Temp

unable to decode

Overall Height

2.120 inches nominal

Overall Length

1.000 inches nominal

Overall Width

1.000 inches nominal

Special Features

resistant to salt water spray

Terminal Type And Quantity

unable to decode

Thread Class

unable to decode

Thread Quantity Per Inch

unable to decode

Thread Series Designator

unable to decode

Winding Dc Resistance Rating

unable to decode

Winding Quantity

1

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0032512

Cross Reference

CAGE Codes

02116

Cooper Wheelock, Inc.

U.s./canadian manufacturers

11447

L3 Technologies, Inc. Div Communication Systems-East

U.s./canadian manufacturers

49671

Lockheed Martin Corporation Dba Lockheed Martin Div Lockheed Martin

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-49-0050

Description

relays, electromechanical, with contacts rated at less than 10 a, for a voltage exceeding 60 v but not exceeding 1000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77254

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5945-00-295-6674?

   The FSCG of the NSN 5945-00-295-6674 is 5945

2. Does the NSN 5945-00-295-6674 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536490050

3. Does NSN 5945-00-295-6674 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5945-00-295-6674 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5945-00-295-6674 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5945-00-295-6674 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963