NSN C818005

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

glass material, 3.000 horsepower rating, 208.0 volts minimum and 230.0 volts maximum voltage rating, floor mounting type, 1050.0 nominal rated speed in rpm.

NSN 6520-01-529-9159 Datasheet

(NSN) National Stock Number

6520-01-529-9159

(FSG) Federal Supply Group

65 - Medical, Dental, and Veterinary Equipment and Supplies

(FSC) Federal Supply Classification

6520 - Supplies, Equipment and Dental Instruments

(NIIN) National Item Identification Number

01-529-9159

Requires Demilitarization

Yes

(INC) Item Name Code

22772

Date

Fri, May 6, 2005

Schedule B Code

9018490000

Horsepower Rating

3.000

Material

glass

Mounting Type

floor

Rated Speed In Rpm

1050.0 nominal

Voltage Rating

208.0 volts minimum and 230.0 volts maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0022772

Cross Reference

CAGE Codes

0BMZ7

Ramvac Dental Products, Inc. Dba Ramvac Dental Products

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

9018-49-0000

Description

other instruments and appliances, used in dental sciences; and parts and accessories, except dental drill engines, nesoi

End Use

21610 - Medicinal equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

87219

(NAICS) North American Industrial Classification System

339114

Questions & Answers

1. What is the FSCG of the NSN 6520-01-529-9159?

   The FSCG of the NSN 6520-01-529-9159 is 6520

2. Does the NSN 6520-01-529-9159 have a Schedule B code assigned?

   Yes, the Schedule B code is 9018490000

3. Does NSN 6520-01-529-9159 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6520-01-529-9159 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6520-01-529-9159 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6520-01-529-9159 was assigned to the Federal Catalog?

   It was assigned 21 years ago, on Fri, May 6, 2005