NSN C90089

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

2.245 inches minimum and 2.255 inches maximum center to center distance between mounting facilities parallel to width, 2 solder lug circuit attachment method and quantity, dc circuit current for which designed, zero adjuster features provided, 2.245 inches minimum and 2.255 inches maximum center to center distance between mounting facilities parallel to length.

NSN 6625-00-074-2045 Datasheet

(NSN) National Stock Number

6625-00-074-2045

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6625 - Electrical and Electronic Properties Measuring and Testing Instruments

(NIIN) National Item Identification Number

00-074-2045

Requires Demilitarization

Yes

(INC) Item Name Code

16476

Date

Fri, Jan 1, 1960

Schedule B Code

9030908030

Center To Center Distance Between Mounting Facilities Parallel To Length

2.245 inches minimum and 2.255 inches maximum

Center To Center Distance Between Mounting Facilities Parallel To Width

2.245 inches minimum and 2.255 inches maximum

Circuit Attachment Method And Quantity

2 solder lug

Circuit Current For Which Designed

dc

Features Provided

zero adjuster

Installation Design

panel

Meter Body Diameter Behind Mounting Flange

2.766 inches nominal

Meter Depth Behind Mounting Flange

1.484 inches nominal

Mounting Arrangement Style

four hole/stud rectangular/square

Mounting Hole Diameter

0.150 inches minimum and 0.160 inches maximum

Mounting Facility Type And Quantity

4 unthreaded hole(s)

Overall Diameter

3.500 inches nominal

Overall Length

1.797 inches nominal

Sensitivity Rating

50.0 microamperes

Style Designator

round flush mtg

Identification

Demilitarization Code

B - Usml items - mutilation to the point of scrap required worldwide. (note 7).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0016476

Cross Reference

CAGE Codes

06442

Mirion Technologies (canberra), Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34580

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061700

Schedule B & Trade

Schedule B

9030-90-8030

Description

parts and accessories of articles of schedule b subheading 9030.39

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

87479

(NAICS) North American Industrial Classification System

334515

Questions & Answers

1. What is the FSCG of the NSN 6625-00-074-2045?

   The FSCG of the NSN 6625-00-074-2045 is 6625

2. Does the NSN 6625-00-074-2045 have a Schedule B code assigned?

   Yes, the Schedule B code is 9030908030

3. Does NSN 6625-00-074-2045 require demilitarization?

   Usml items - mutilation to the point of scrap required worldwide. (note 7).

4. Does NSN 6625-00-074-2045 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6625-00-074-2045 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6625-00-074-2045 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960