NSN CA06R28-7P

A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see bushing, nonmetallic. See also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. Excludes:bushing, drill, jig.

removable single mating end single contact grouping contact removability, straight shape, internal coupling body style, 900.0 single mating end single contact grouping contact maximum ac voltage rating in volts, internally threaded coupling ring connector locking method, copper alloy single mating end single contact grouping contact material.

NSN 5935-01-261-9331 Datasheet

(NSN) National Stock Number

5935-01-261-9331

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-261-9331

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Thu, Aug 20, 1987

Schedule B Code

8536695050

Body Style

straight shape, internal coupling

Connector Locking Method

internally threaded coupling ring

Contact Material

copper alloy single mating end single contact grouping

Contact Removability

removable single mating end single contact grouping

Contact Maximum Ac Voltage Rating In Volts

900.0 single mating end single contact grouping

Contact Maximum Current Rating In Amps

135.0 single mating end single contact grouping

Contact Maximum Dc Voltage Rating In Volts

1250.0 single mating end single contact grouping

Contact Position Arrangement Style

28-7 single mating end

Contact Surface Treatment Document And Classification

mil-g-45204 mil spec single treatment response single mating end single contact grouping

Contact Surface Treatment

gold single mating end single contact grouping

Environmental Protection

moisture proof and salt water resistant and vibration proof

Included Contact Quantity

2 single mating end single contact grouping

Included Contact Type

round pin single mating end single contact grouping

Insert Material

rubber silicone class q single mating end

Insert Position In Deg

0.0

Mating End Quantity

1

Nominal Thread Length

0.467 inches and 0.664 inches

Nominal Thread Size

1.750 inches

Overall Diameter

1.969 inches maximum

Overall Length

2.500 inches maximum

Polarization Method

keyway or multiple keyway

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.010 gold grains, troy

Shell Surface Treatment Document And Classification

qq-p-416,ty 2,class 3 fed spec all treatment responses

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium and chromate

Shell Type

solid

Special Features

in order to complete the connector assembly,the user must obtain/provide the backshell; standard versions may be ordered as nsn 5935-01-189-3225,p/n m85049/52-1-28w for the straight style,or nsn 5935-01-174-3672,p/n m85049/51-1-28w for the right angle style

Specification/Standard Data

96906-ms3456 government standard

Terminal Location

back single mating end single contact grouping

Terminal Type

crimp single mating end single contact grouping

Test Data Document

"81349-mil-c-5015 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2a and 2b

Thread Direction

right-hand

Thread Quantity Per Inch

18

Thread Series Designator

uns

Threaded Device Type

back shell and coupling facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

71468

Itt Cannon Llc

U.s./canadian manufacturers

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-01-261-9331?

   The FSCG of the NSN 5935-01-261-9331 is 5935

2. Does the NSN 5935-01-261-9331 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-01-261-9331 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-261-9331 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-261-9331 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-261-9331 was assigned to the Federal Catalog?

   It was assigned 39 years ago, on Thu, Aug 20, 1987