NSN CA3106E28-13PF80

A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.

straight shape, internal coupling w/strain relief body style, 0.938 inches maximum cable entrance diameter, 2.953 inches maximum body length, cable clamp connector cable strain relief method, internally threaded coupling ring connector locking method.

NSN 5935-00-451-5708 Datasheet

(NSN) National Stock Number

5935-00-451-5708

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-451-5708

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Wed, Jun 2, 1971

Schedule B Code

8536695050

Body Length

2.953 inches maximum

Body Style

straight shape, internal coupling w/strain relief

Cable Entrance Diameter

0.938 inches maximum

Connector Cable Strain Relief Method

cable clamp

Connector Locking Method

internally threaded coupling ring

Contact Material

copper alloy single mating end single contact grouping

Contact Removability

removable single mating end single contact grouping

Contact Maximum Ac Voltage Rating In Volts

500.0 single mating end single contact grouping

Contact Maximum Current Rating In Amps

22.0 single mating end single contact grouping

Contact Maximum Dc Voltage Rating In Volts

700.0 single mating end single contact grouping

Contact Position Arrangement Style

28-13 single mating end

Contact Surface Treatment

silver single mating end single contact grouping

Environmental Protection

moisture resistant and salt water resistant and vibration resistant

Included Contact Quantity

26 single mating end single contact grouping

Included Contact Type

round pin single mating end single contact grouping

Insert Material

rubber single mating end

Insert Position In Deg

0.0

Mating End Quantity

1

Nominal Thread Length

0.724 inches

Nominal Thread Size

1.750 inches

Overall Diameter

1.969 inches maximum

Polarization Method

keyway or multiple keyway

Precious Material And Location

contact surfaces silver

Precious Material

silver

Precious Material And Weight

0.026 silver grains, troy

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium and chromate

Shell Type

solid

Terminal Location

back single mating end single contact grouping

Terminal Type

crimp single mating end single contact grouping

Thread Class

2b

Thread Direction

right-hand

Thread Quantity Per Inch

18

Thread Series Designator

uns

Threaded Device Type

coupling facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

71468

Itt Cannon Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-00-451-5708?

   The FSCG of the NSN 5935-00-451-5708 is 5935

2. Does the NSN 5935-00-451-5708 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-00-451-5708 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-451-5708 contain precious materials?

   Item contains silver.

5. Does NSN 5935-00-451-5708 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-451-5708 was assigned to the Federal Catalog?

   It was assigned 55 years ago, on Wed, Jun 2, 1971