1. Home /
  2. FSC NSN Catalog /
  3. Circuit Breakers /
  4. CDLA150

NSN CDLA150

Circuit Breaker

An item of various shapes and cross sections, usually flanged and designed to fit over a rod, shaft, or the like, for the purpose of encasing and posititioning a seal, plain encased or a seal, plain. The flange is usually drilled for stud or bolt mounting. Item does not include the seal. Excludes:retainer, packing.

single pole type body style, 1.060 inches nominal center to center distance between terminals parallel to length, 1.880 inches nominal body width, overcurrent single location circuit protection type, 2.406 inches nominal distance between centerlines of mounting facilities parallel to body length.

NSN 5925-00-775-1717 Datasheet

(NSN) National Stock Number
5925-00-775-1717
(FSC) Federal Supply Classification
5925 - Circuit Breakers
(NIIN) National Item Identification Number
00-775-1717
Requires Demilitarization
Yes
(INC) Item Name Code
00136
Date
Mon, Jan 1, 1962
Schedule B Code
8536200040
Body Style
single pole type
Body Width
1.880 inches nominal
Center To Center Distance Between Terminals Parallel To Length
1.060 inches nominal
Circuit Protection Type
overcurrent single location
Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
2.406 inches nominal
Fragility Factor
moderately rugged
Inclosure Protection Type For Which Designed
shock resistant and vibration resistant and salt spray proof and fungus resistant
Internal Trip Release Configuration
series trip single location
Material
plastic case
Maximum Continuous Load Current Rating Per Pole
150.0 amperes dc single location
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps
575.0 dc single location
Mounting Facility Type And Quantity
2 unthreaded hole(s)
Mounting Surface To Terminal End Distance
2.000 inches maximum
Operating Voltage Type And Rating Per Pole In Volts
28.0 dc single location
Overall Length
3.160 inches nominal
Pole Quantity
1
Reset Method
automatic
Specification/Standard Data
81349--13516/7bii government specification
Storage Type
general purpose warehouse
Terminal Type And Quantity
2 threaded stud
Test Data Document
"81349-mil-c-13516 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
Trip Delay Time In Seconds Per Rated Continuous Current
8.000 minimum at 200 pct and 50.000 maximum at 200 pct single location
Trip Release Ambient Temp Rating
25.0 celsius nominal single location
Trip Release Characteristic
time delay single location
Trip Release Method
thermal single location
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent
138.0 single location
Unthreaded Mounting Hole Diameter
0.195 inches minimum and 0.225 inches maximum

Identification

Demilitarization Code
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Precious Metals Indicator
A - Item does not contain precious metal.
Hazardous Metals Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Source of Supply Code
S9E - Defense supply center columbus, columbus, oh 43218
Pseudo Item Name Code
0000136

Cross Reference

CAGE Codes

45152
Oshkosh Corp
U.s./canadian manufacturers
A00AM
E.c.a Etablissement Central des Approvisionnements des Forces Armees Royales
Military standards and standards organizations (ex:stanags,milspecs,defstans)
19207
U S Army Tank Automotive Command Amsta-Im-Mm
Government departments or units, including military organizations
82647
Sensata Technologies, Inc. Div Sensata Attleboro
U.s./canadian manufacturers
81349
Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
Military standards and standards organizations (ex:stanags,milspecs,defstans)
96906
Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M
Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity
HZ -
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
National Motor Freight Class Rating
M - 85.0
Special Handling
9 - Other or no special handling required (sh)
Type of Cargo
Z - No special type of cargo code applicable
Uniform Freight Classification Item Number
34430
Water Commodity
658 - Electrical appliances, small
National Motor Freight Classification Item Number
061360

Schedule B & Trade

Schedule B
8536-20-0040
Description
automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi
End Use
20005 - Electric apparatus
Unit of Quantity
NO
USDA
Yes
(SITC) Standard International Trade Classification
77252
(NAICS) North American Industrial Classification System
335313

Questions & Answers

  1. What is the FSCG of the NSN 5925-00-775-1717?

    The FSCG of the NSN 5925-00-775-1717 is 5925

  2. Does the NSN 5925-00-775-1717 have a Schedule B code assigned?

    Yes, the Schedule B code is 8536200040

  3. Does NSN 5925-00-775-1717 require demilitarization?

    Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

  4. Does NSN 5925-00-775-1717 contain precious materials?

    Item does not contain precious metal.

  5. Does NSN 5925-00-775-1717 contain hazardous materials?

    Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

  6. When the NSN 5925-00-775-1717 was assigned to the Federal Catalog?

    It was assigned 64 years ago, on Mon, Jan 1, 1962

Globe Transparent
Get in Touch
Looking for technical parts, product details, or custom project planning? Our team has you covered with end-to-end support every step of the way.
Contact Us

Pricing & Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.