NSN CM04FA391F03

A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also rod, threaded end and rod, continuous thread.

390.000 picofarads single section capacitance value per section, 0.300 inches minimum and 0.390 inches maximum body length, w/o mtg facilities terminal(s) on one surface body style, 0.140 inches minimum and 0.220 inches maximum body height, 0.380 inches maximum body width.

NSN 5910-00-558-7466 Datasheet

(NSN) National Stock Number

5910-00-558-7466

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-558-7466

Requires Demilitarization

Yes

(INC) Item Name Code

00005

Date

Mon, Nov 11, 1974

Schedule B Code

8532290020

Body Height

0.140 inches minimum and 0.220 inches maximum

Body Length

0.300 inches minimum and 0.390 inches maximum

Body Width

0.380 inches maximum

Body Style

w/o mtg facilities terminal(s) on one surface

Capacitance Value Per Section

390.000 picofarads single section

Center To Center Distance Between Terminals Parallel To Length

0.150 inches nominal

Dissipation Factor At Reference Temp In Percent

0.0008

Insulation Resistance At Reference Temp

100000.0 megohms

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

100.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Specification/Standard Data

81349-mil-c-5/18 government specification

Temp Coefficient Of Capacitance Range Per Section In Ppm Per Deg Celsius

+0.0 to 70.0 single section

Terminal Diameter

0.010 inches nominal

Terminal Length

1.000 inches minimum

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

"81349-mil-c-5 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-1.00 to 1.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000005

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Schedule B & Trade

Schedule B

8532-29-0020

Description

fixed capacitors, mica dielectric, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-558-7466?

   The FSCG of the NSN 5910-00-558-7466 is 5910

2. Does the NSN 5910-00-558-7466 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290020

3. Does NSN 5910-00-558-7466 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-558-7466 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-558-7466 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-558-7466 was assigned to the Federal Catalog?

   It was assigned 51 years ago, on Mon, Nov 11, 1974