NATO Stock Number
5905-00-723-3694
Sold in multiples of
1 EA
DEMIL
NO
Section Quantity
2
Body Style
Cylindrical bushing mounted
Reliability Indicator
Not established
Body Diameter
1.125 inches
Shaft Diameter
0.266 inches
Shaft Length
1.250 inches
Mounting Bushing Length
0.375 inches
Body Length
1.468 inches
Undercut Diameter
0.186 inches
Shaft Style
Round, stepped
Switch Type
Rotary
Switch Voltage Rating In Volts
250.0 and 120.0
Actuator Type
Dual concentric
Effective Electrical Rotation In Deg Angular Rotation
300.0
Nonturn Device Location
At 9 oclock
Nonturn Device Radius
0.531 inches
Switch Operating Position
Start of rotation
Switch Contact Arrangement
Single pole, single throw, normally open, both positions maintained
Fragility Factor
Moderately rugged
Undercut Length
0.438 inches
Screw Thread Diameter
0.375 inches
Screw Thread Series Designator
Unef
Screw Thready Qty Per Inch (tpi)
32.0
Terminal Location
Rear-bottom
Mounting Method
Standard bushing
Features Provided
Switch
Electrical Resistance Per Section
20.0 percent, rated amperes c and better industrial clears
Electrical Resistance Per Section
75.0 percent, rated amperes c and better finish
Electrical Resistance Per Section
20.0 kilohms 2nd section
Electrical Resistance Per Section
75.0 kilohms 1st section
Rotary Actuator Travel In Angular Deg
300.0
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
85.0 all sections
Power Dissipation Rating Per Section In Watts
0.5 free air all sections
Resistance Tolerance Per Section In Percent
-20.0/+20.0 all sections
Resistance Tolerance Per Section In Percent
-20.0 to 20.0 all sections
Actuator Travel Control Feature
Stops
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
40.0 all sections
Switch Current Type And Rating In Amps
1.000 ac and 3.000 dc
Standard Taper Curve Per Section
A all sections
Test Data Document
06840-733020bd drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity
8 tab, solder lug