- Home /
- FSC NSN Catalog /
- Capacitors /
- CM60FK101GO3
NSN CM60FK101GO3
Mica Dielectric Fixed Capacitor
w/o mtg hole(s)/slot(s), terminal(s) on one surface body style, 0.750 inches nominal body height, 1.310 inches nominal body width, 100.000 picofarads single section capacitance value per section, 1.750 inches nominal body length.
NSN 5910-00-180-8167 Datasheet
- (NSN) National Stock Number
- 5910-00-180-8167
- (FSG) Federal Supply Group
- 59 - Electrical and Electronic Equipment Components
- (FSC) Federal Supply Classification
- 5910 - Capacitors
- (NIIN) National Item Identification Number
- 00-180-8167
- Requires Demilitarization
- Yes
- (INC) Item Name Code
- 00005
- Date
- Mon, Nov 16, 1970
- Schedule B Code
- 8532290020
- Body Height
- 0.750 inches nominal
- Body Length
- 1.750 inches nominal
- Body Style
- w/o mtg hole(s)/slot(s), terminal(s) on one surface
- Body Width
- 1.310 inches nominal
- Capacitance Value Per Section
- 100.000 picofarads single section
- Center To Center Distance Between Terminals Parallel To Length
- 1.240 inches minimum and 1.260 inches maximum
- Dissipation Factor At Reference Temp In Percent
- 0.3500
- Insulation Resistance At Maximum Operating Temp
- 1500.0 megohms
- Insulation Resistance At Reference Temp
- 10000.0 megohms
- Material
- plastic case
- Nonderated Operating Temp
- -55.0 celsius minimum and 125.0 celsius maximum
- Nonderated Continuous Voltage Rating And Type Per Section
- 2500.0 dc single section
- Reliability Indicator
- not established
- Schematic Diagram Designator
- no common or grounded electrode(s)
- Temp Coefficient Of Capacitance Range Per Section In Ppm Per Deg Celsius
- +0.0 to 70.0 single section
- Terminal Type And Quantity
- 2 threaded hole
- Test Data Document
- "81349-mil-c-5+10 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
- Tolerance Range Per Section
- -2.00 to 2.00 percent single section
Identification
- Demilitarization Code
- A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Precious Metals Indicator
- U - Precious metal content is unknown
- Hazardous Metals Indicator
- P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
- Pseudo Item Name Code
- 0000005
Cross Reference
CAGE Codes
- 81349
-
Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-MMilitary standards and standards organizations (ex:stanags,milspecs,defstans)
Freight Information
- Air Commodity
- HZ -
- Air Dimension
- A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- National Motor Freight Class Rating
- P - 77.5
- Special Handling
- 9 - Other or no special handling required (sh)
- Type of Cargo
- Z - No special type of cargo code applicable
- Uniform Freight Classification Item Number
- 34450
- Water Commodity
- 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
- National Motor Freight Classification Item Number
- 061400
Schedule B & Trade
- Schedule B
- 8532-29-0020
- Description
- fixed capacitors, mica dielectric, nesoi
- End Use
- 20005 - Electric apparatus
- Unit of Quantity
- NO
- USDA
- Yes
- (SITC) Standard International Trade Classification
- 77867
- (NAICS) North American Industrial Classification System
- 334416
Questions & Answers
-
What is the FSCG of the NSN 5910-00-180-8167?
The FSCG of the NSN 5910-00-180-8167 is 5910
-
Does the NSN 5910-00-180-8167 have a Schedule B code assigned?
Yes, the Schedule B code is 8532290020
-
Does NSN 5910-00-180-8167 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
-
Does NSN 5910-00-180-8167 contain precious materials?
Precious metal content is unknown
-
Does NSN 5910-00-180-8167 contain hazardous materials?
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
-
When the NSN 5910-00-180-8167 was assigned to the Federal Catalog?
It was assigned 55 years ago, on Mon, Nov 16, 1970
Pricing & Availability
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Stock Checks
-
3040-01-263-228810/14/2026 04:10 PM EDTShouldered Shaft1 in stock
-
5320-01-258-605810/14/2026 04:10 PM EDTBlind Rivet12,890 in stock
-
5307-01-158-170710/14/2026 04:10 PM EDTSpecial Stud995 in stock
-
5306-01-044-220110/14/2026 04:10 PM EDTEye Bolt2 in stock
-
5950-01-375-511410/14/2026 04:10 PM EDTPower Transformer5 in stock
-
5930-01-480-979910/14/2026 04:10 PM EDTToggle Switch1 in stock
-
4510-00-252-688810/14/2026 04:10 PM EDTDouble Faucet438 in stock
-
5999-01-030-681710/14/2026 12:10 PM EDTSquelch Amplifier1 in stock
-
5310-01-316-795010/14/2026 12:10 PM EDTLock Washer4 in stock
-
5310-01-463-314710/14/2026 12:10 PM EDTFlat Washer3,056 in stock
-
5342-01-280-555210/14/2026 12:10 PM EDTSpecial Cap6 in stock
-
5306-01-098-377710/14/2026 12:10 PM EDTMachine Bolt1,851 in stock
-
2995-01-292-446910/14/2026 12:10 PM EDTSpecial Adapter26 in stock
-
5340-01-022-330110/14/2026 12:10 PM EDTFlush Catch4 in stock
-
1240-00-818-447610/14/2026 08:10 AM EDTOptical Instrument Headrest3 in stock
Recent Updates
-
6210-00-008-550610/13/2026 08:10 AM EDTLight LensIn Indoor and Outdoor Electric Lighting Fixtures
-
6210-00-008-550710/13/2026 08:10 AM EDTLight LensIn Indoor and Outdoor Electric Lighting Fixtures
-
6210-00-008-550810/13/2026 08:10 AM EDTLight LensIn Indoor and Outdoor Electric Lighting Fixtures
-
6210-00-008-550410/13/2026 08:10 AM EDTLight LensIn Indoor and Outdoor Electric Lighting Fixtures
-
6210-00-008-550510/13/2026 08:10 AM EDTLight LensIn Indoor and Outdoor Electric Lighting Fixtures
-
1660-00-008-538210/12/2026 08:10 AM EDTHeat Exchanger Valve PistonIn Pressurizing Equipment, Heating and Aircraft Air Conditioning
-
1660-00-008-538310/12/2026 08:10 AM EDTFlat Valve DiaphragmIn Pressurizing Equipment, Heating and Aircraft Air Conditioning
-
4730-00-008-538510/12/2026 08:10 AM EDTPressure Hole PlugIn Hose, Pipe, Tube, Lubrication and Railing Fittings
-
1660-00-008-538610/12/2026 08:10 AM EDTValve Body AssemblyIn Pressurizing Equipment, Heating and Aircraft Air Conditioning
-
1660-00-008-538710/12/2026 08:10 AM EDTCabin Air Valve GuideIn Pressurizing Equipment, Heating and Aircraft Air Conditioning
-
5342-00-007-006710/09/2026 08:10 AM EDTWeapon System Resilient MountIn Weapon System Hardware
-
5330-00-007-007010/09/2026 08:10 AM EDTPacking RetainerIn Packing and Gasket Materials
-
5310-00-007-007610/09/2026 08:10 AM EDTHexagon NutIn Nuts and Washers
-
5310-00-007-007810/09/2026 08:10 AM EDTKey WasherIn Nuts and Washers
-
5935-00-007-075810/09/2026 08:10 AM EDTElectr Receptacle Connector BodyIn Electrical Connectors
Popular Categories
-
FSC 1377Cartridge and Propellant Actuated Devices and Components
-
FSC 1250Fire Control Stabilizing Mechanisms
-
FSC 3611Industrial Marking Machines
-
FSC 6830Gases: Compressed and Liquefied
-
FSC 8310Yarn and Thread
-
FSC 1905Combat Ships and Landing Vessels
-
FSC 3413Drilling and Tapping Machines
-
FSC 1355Inert Torpedos and Components
-
FSC 7920Brooms, Brushes, Mops and Sponges
-
FSC 131575mm Through 125mm Ammunition
-
FSC 6021Fiber Optic Switches
-
FSC 7450Office Type Sound Recording and Reproducing Machines
-
FSC 7644Charts and Geodetic Products Digital Maps
-
FSC 7220Floor Coverings
-
FSC 3610Bookbinding Equipment, Duplicating and Printing