NSN CMC32

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

holes accommodated item securing device type, 1.250 inches nominal distance from retainer center to centerline of mounting facility, feat criticality code justification, 120.0 angle between adjacent mounting facilities in deg, unable to decode bolt circle diameter.

NSN 5910-00-551-8605 Datasheet

(NSN) National Stock Number

5910-00-551-8605

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-551-8605

Requires Demilitarization

Yes

(INC) Item Name Code

19799

Date

Tue, Oct 22, 1974

Schedule B Code

8532900000

Accommodated Item Securing Device Type

holes

Angle Between Adjacent Mounting Facilities In Deg

120.0

Bolt Circle Diameter

unable to decode

Criticality Code Justification

feat

Distance From Retainer Center To Centerline Of Mounting Facility

1.250 inches nominal

Inside Diameter

2.000 inches nominal

Material

steel

Mounting Facility Type And Quantity

unable to decode

Mounting Slot Length

unable to decode

Mounting Slot Width

unable to decode

Overall Height

1.125 inches nominal

Overall Length

2.476 inches nominal

Overall Width

2.070 inches nominal

Special Features

item must comply with requirements of desc production standard no. l01644

Style Designator

srew clamp, footed hole mounting

Surface Treatment

nickel

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0019799

Cross Reference

CAGE Codes

56289

Sprague Electric Co World Hqs

U.s./canadian manufacturers

16236

Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)

Government departments or units, including military organizations

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-90-0000

Description

electrical capacitor parts

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77869

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-551-8605?

   The FSCG of the NSN 5910-00-551-8605 is 5910

2. Does the NSN 5910-00-551-8605 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532900000

3. Does NSN 5910-00-551-8605 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-551-8605 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-551-8605 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-551-8605 was assigned to the Federal Catalog?

   It was assigned 51 years ago, on Tue, Oct 22, 1974