NSN CPP1827

A switch which is externally actuated by a thumbwheel and/or pushbutton. A legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. Electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. May have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing.

continuous duty type, 60.0 nominal frequency in hertz, unable to decode center to center distance between mounting facilities parallel to width, 1 coil quantity, unable to decode center to center distance between mounting facilities parallel to the altitude of an isosceles triangle.

NSN 5945-00-968-6431 Datasheet

(NSN) National Stock Number

5945-00-968-6431

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5945 - Relays and Solenoids

(NIIN) National Item Identification Number

00-968-6431

Requires Demilitarization

Yes

(INC) Item Name Code

32512

Date

Mon, Jan 1, 1962

Schedule B Code

8536490075

Center To Center Distance Between Mounting Facilities Parallel To Width

unable to decode

Center To Center Distance Between Mounting Facilities Parallel To The Altitude Of An Isosceles Triangle

unable to decode

Coil Quantity

1

Duty Type

continuous

Frequency In Hertz

60.0 nominal

Main Contact Load Current Rating At Maximum Rated Voltage

unable to decode

Main Contact Maximum Voltage Rating In Volts

120.0 ac

Mounting Facility Pattern

unable to decode

Mounting Facility Type And Quantity

3 threaded stud(s) single mounting facility

Nominal Thread Size

unable to decode

Nonpile-Up Main Contact Arrangement

3 pole, double throw, one position momentary

Operating Voltage Rating And Type At Specified Temp

unable to decode

Overall Height

2.406 inches nominal

Overall Length

4.813 inches nominal

Overall Width

3.281 inches nominal

Terminal Type And Quantity

unable to decode

Thread Class

unable to decode

Thread Direction

unable to decode

Thread Quantity Per Inch

unable to decode

Thread Series Designator

unable to decode

Winding Dc Resistance Rating

unable to decode

Winding Quantity

1

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0032512

Cross Reference

CAGE Codes

02116

Cooper Wheelock, Inc.

U.s./canadian manufacturers

09017

Edo

U.s./canadian manufacturers

1C2N9

Harris Corporation Dba Edo Communications and Countermeasures Systems

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-49-0075

Description

relays, electromechanical, for a voltage exceeding 60 v but not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77254

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5945-00-968-6431?

   The FSCG of the NSN 5945-00-968-6431 is 5945

2. Does the NSN 5945-00-968-6431 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536490075

3. Does NSN 5945-00-968-6431 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5945-00-968-6431 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5945-00-968-6431 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5945-00-968-6431 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962