NSN CPP1903D001C6-10

An item consisting of a partial turn as one or more turns of wire or other conductive material which constitutes one continuous untapped winding. It may be wound or formed in other than a circular manner and may be self-supporting, requiring no coil form. It is specifically designed to furnish inductive reactance in a circuit carrying radio frequency current ranging from 20 kilohertz (kilocycles) and above. It may include tuning devices, integral resistors and capacitors; however, excludes:filter (as modified). The coil has only two electrical terminals. For items having tapped winding or more than one winding - see transformer, radio frequency. For coils wound on resistors, which are designed to be inserted in the circuit of a radio frequency stage to suppress high frequency parasitic oscillations, see suppressor, parasitic.

fillister head style, 0.625 inches nominal fastener length, 0.208 inches minimum and 0.226 inches maximum head diameter, 0.089 inches minimum and 0.096 inches maximum head height, round head hole configuration style.

NSN 5305-00-151-0386 Datasheet

(NSN) National Stock Number

5305-00-151-0386

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5305 - Screws

(NIIN) National Item Identification Number

00-151-0386

Requires Demilitarization

Yes

(INC) Item Name Code

06657

Date

Tue, Jan 1, 1963

Schedule B Code

7318152000

Fastener Length

0.625 inches nominal

Head Diameter

0.208 inches minimum and 0.226 inches maximum

Head Height

0.089 inches minimum and 0.096 inches maximum

Head Hole Configuration Style

round

Head Style

fillister

Hole Diameter

0.046 inches nominal

Hole Quantity

4

Internal Drive Style

cross recess type 1

Minimum Tensile Strength

60000 pounds per square inch

Nominal Thread Diameter

0.138 inches

Screw Material Document And Classification

qq-s-630 fed spec 2nd material response or qq-s-631 fed spec 2nd material response or qq-s-634 fed spec 2nd material response

Screw Material

steel or steel comp 1010

Screw Surface Treatment Document And Classification

qq-p-416,ty 1,cl 3 fed spec single treatment response

Screw Surface Treatment

cadmium

Thread Class

2a

Thread Direction

right-hand

Thread Length

0.563 inches minimum and 0.625 inches maximum

Thread Quantity Per Inch

32

Thread Series Designator

unified national coarse (unc)

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

S9I - Defense industrial supply center philadelphia, pennsylvania 19111

Pseudo Item Name Code

0006657

Cross Reference

CAGE Codes

00000

Ordnance Corps

U.s./canadian manufacturers

66503

Woodward, Inc. Div Fuel Systems and Controls

U.s./canadian manufacturers

62983

Eaton Aerospace, Llc Dba Jackson South

U.s./canadian manufacturers

45681

Parker-Hannifin Corporation Dba Pneutronics Div Corporate Headquarters

U.s./canadian manufacturers

36378

Raytheon Technical Services Company

U.s./canadian manufacturers

19315

Honeywell Intl Inc Defense Avionics Systems Former Bendix Navigation and Control Systems

U.s./canadian manufacturers

64547

Honeywell International, Inc Div Aerospace-Tucson

U.s./canadian manufacturers

83298

Allied Signal Inc Aerospace Equipment Systems Eatontown Site

U.s./canadian manufacturers

80020

Naval Air Warfare Center Aircraft Division Joint Base Jbmdl

U.s./canadian manufacturers

88044

Aeronautical Standards Group Dept of Navy and Air Force

Military standards and standards organizations (ex:stanags,milspecs,defstans)

09017

Edo

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

U - 50.0

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

48950

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

093486

Schedule B & Trade

Schedule B

7318-15-2000

Description

bolts and bolts and their nuts or washers exported in the same shipment

End Use

12110 - Iron and steel products, other

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69421

(NAICS) North American Industrial Classification System

332722

Questions & Answers

1. What is the FSCG of the NSN 5305-00-151-0386?

   The FSCG of the NSN 5305-00-151-0386 is 5305

2. Does the NSN 5305-00-151-0386 have a Schedule B code assigned?

   Yes, the Schedule B code is 7318152000

3. Does NSN 5305-00-151-0386 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5305-00-151-0386 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5305-00-151-0386 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5305-00-151-0386 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963