NSN CSF0474

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

metal body material, tin body surface treatment, 1000.0 average life rating in hours, 0.788 inches maximum body length, 0.406 inches nominal body outside diameter.

NSN 5915-00-332-0362 Datasheet

(NSN) National Stock Number

5915-00-332-0362

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5915 - Filters and Networks

(NIIN) National Item Identification Number

00-332-0362

Requires Demilitarization

Yes

(INC) Item Name Code

00765

Date

Sun, Dec 16, 1973

Schedule B Code

8527995030

Average Life Rating In Hours

1000.0

Body Length

0.788 inches maximum

Body Material

metal

Body Outside Diameter

0.406 inches nominal

Body Surface Treatment

tin

Features Provided

nut and washer

Full Load Insertion Loss Frequencies In Megahertz

0.03 and 0.15 and 0.3 and 1.0 and 10.0 and 1000.0

Full Load Minimum Insertion Loss At Specified Frequency In Decibels

16.0 and 31.0 and 36.0 and 48.0 and 72.0 and 74.0

Functional Terminal Type And Quantity

unable to decode

Inclosure Type

hermetically sealed

Load Impedance Per Function

50.0 ohms blank

Maximum Dielectric Withstanding Dc Voltage

120.0 volts at sea level

Maximum Temp Rise

25.0 celsius

Maximum Voltage Drop Per Function

6.0 volts dc blank

Mounting Facility Screw Thread Series Designator

unf

Mounting Facility Type And Quantity

1 threaded bushing

Nominal Thread Size

0.250 inches

Operating Current Rating Per Function In Amps

5.0 blank

Operating Voltage Rating And Type Per Function

60.0 volts dc blank

Operating Temp Range

-55.0 to 85.0 celsius

Overall Length

1.328 inches maximum

Principal Circuitry Type Per Function

inductance-capacitance blank

Source Impedance Rating Per Function

50.0 ohms blank

Special Features

capacitor at mounting end

Style Designator

round terminal/terminals on opposite surfaces

Vibration Resistance Range In Hertz

+10.0 to 2000.0

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000765

Cross Reference

CAGE Codes

58421

Greatbatch Sierra Inc

U.s./canadian manufacturers

12294

Murata Erie North America Inc Divof Murata Erie

U.s./canadian manufacturers

82577

Raytheon Company Dba Raytheon

Non-manufacturers

19193

Coil Specialty Company, Inc.

U.s./canadian manufacturers

51642

Centre Capacitor Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

58500

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061990

Schedule B & Trade

Schedule B

8527-99-5030

Description

reception apparatus, nesoi

End Use

41210 - Stereo equipment, etc.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76289

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5915-00-332-0362?

   The FSCG of the NSN 5915-00-332-0362 is 5915

2. Does the NSN 5915-00-332-0362 have a Schedule B code assigned?

   Yes, the Schedule B code is 8527995030

3. Does NSN 5915-00-332-0362 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 5915-00-332-0362 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5915-00-332-0362 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5915-00-332-0362 was assigned to the Federal Catalog?

   It was assigned 52 years ago, on Sun, Dec 16, 1973