NSN CVC7909

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

1.057 inches minimum and 1.067 inches maximum center to center distance between mounting facilities parallel to length, 1.057 inches minimum and 1.067 inches maximum center to center distance between mounting facilities parallel to width, aluminum alloy material, 4 unthreaded hole(s) mounting facility type and quantity, 0.057 inches minimum and 0.067 inches maximum overall height.

NSN 5935-01-121-7909 Datasheet

(NSN) National Stock Number

5935-01-121-7909

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-121-7909

Requires Demilitarization

Yes

(INC) Item Name Code

21538

Date

Sun, Nov 8, 1981

Schedule B Code

8548900100

Center To Center Distance Between Mounting Facilities Parallel To Length

1.057 inches minimum and 1.067 inches maximum

Center To Center Distance Between Mounting Facilities Parallel To Width

1.057 inches minimum and 1.067 inches maximum

Material

aluminum alloy

Mounting Facility Type And Quantity

4 unthreaded hole(s)

Overall Height

0.057 inches minimum and 0.067 inches maximum

Overall Length

1.340 inches minimum and 1.360 inches maximum

Overall Width

1.340 inches minimum and 1.360 inches maximum

Style Designator

square shape

Unthreaded Mounting Hole Diameter

0.172 inches minimum and 0.175 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0021538

Cross Reference

CAGE Codes

19904

Stroco Manufacturing, Inc. Dba Stroco Manufacturing Inc

U.s./canadian manufacturers

27361

Burke Products Inc

U.s./canadian manufacturers

30003

Naval Air Systems Command Managed Original Design Activity Not Material/parts Supplier

Government departments or units, including military organizations

56742

Charles V Clark Co.

U.s./canadian manufacturers

03TF2

Triangle Tool Co

U.s./canadian manufacturers

58017

Cobra Industries Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5935-01-121-7909?

   The FSCG of the NSN 5935-01-121-7909 is 5935

2. Does the NSN 5935-01-121-7909 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-01-121-7909 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-121-7909 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5935-01-121-7909 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-121-7909 was assigned to the Federal Catalog?

   It was assigned 44 years ago, on Sun, Nov 8, 1981