NSN CW20C823K

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.200 inches maximum body width, 0.082 microfarads single section capacitance value per section, 0.125 inches maximum body height, w/o mtg facilities terminal(s) on one surface body style, 0.200 inches maximum body length.

NSN 5910-01-015-1686 Datasheet

(NSN) National Stock Number

5910-01-015-1686

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-015-1686

Requires Demilitarization

Yes

(INC) Item Name Code

00007

Date

Thu, Jan 15, 1976

Schedule B Code

8532290040

Body Height

0.125 inches maximum

Body Length

0.200 inches maximum

Body Width

0.200 inches maximum

Body Style

w/o mtg facilities terminal(s) on one surface

Capacitance Value Per Section

0.082 microfarads single section

Center To Center Distance Between Terminals Parallel To Length

0.100 inches nominal

Dissipation Factor At Reference Temp In Percent

2.5000

Insulation Resistance At Reference Temp

100000.0 megohms

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

50.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Diameter

0.020 inches nominal

Terminal Length

1.250 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Range Per Section

-10.00 to 10.00 percent single section

Voltage Temp Limits Per Section In Percent Capacitance Change

-15.0 to 15.0 without voltage applied single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000007

Cross Reference

CAGE Codes

51642

Centre Capacitor Inc

U.s./canadian manufacturers

37695

Raytheon Company

U.s./canadian manufacturers

16546

Mepco/centralab a North American Philips Co

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-015-1686?

   The FSCG of the NSN 5910-01-015-1686 is 5910

2. Does the NSN 5910-01-015-1686 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-015-1686 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-015-1686 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-015-1686 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-015-1686 was assigned to the Federal Catalog?

   It was assigned 50 years ago, on Thu, Jan 15, 1976