NSN DAT1490

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

2 jack quantity, j1-2 jack contact arrangement, 4 mounting hole quantity, nonmetallic mounting strip material type, spring leaf jack contact type.

NSN 5935-00-825-9646 Datasheet

(NSN) National Stock Number

5935-00-825-9646

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-825-9646

Requires Demilitarization

Yes

(INC) Item Name Code

00123

Date

Mon, Jan 1, 1962

Schedule B Code

8517700000

Jack Contact Arrangement

j1-2

Jack Quantity

2

Jack Contact Type

spring leaf

Material Type

nonmetallic mounting strip

Mounting Hole Quantity

4

Mounting Hole Size

0.125 inches nominal

Overall Height

3.000 inches nominal

Overall Length

1.313 inches nominal

Overall Width

2.375 inches nominal

Shank Diameter

0.250 inches nominal

Shank Length

1.250 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000123

Cross Reference

CAGE Codes

28528

Itt Industries Inc Itt Aerospace Communications Div East

U.s./canadian manufacturers

09975

Unisys Corporation Dba Unisys Corp

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35290

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063300

Questions & Answers

1. What is the FSCG of the NSN 5935-00-825-9646?

   The FSCG of the NSN 5935-00-825-9646 is 5935

2. Does the NSN 5935-00-825-9646 have a Schedule B code assigned?

   Yes, the Schedule B code is 8517700000

3. Does NSN 5935-00-825-9646 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-825-9646 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-00-825-9646 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-825-9646 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962