NSN DBX-101

A switch which is externally actuated by a thumbwheel and/or pushbutton. A legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. Electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. May have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing.

0.166 inches nominal first hole diameter, 0.532 inches nominal first side radius, 0.215 inches nominal fifth hole spacing, 0.234 inches nominal first hole spacing, 0.234 inches nominal first end radius.

NSN 5970-01-057-6698 Datasheet

(NSN) National Stock Number

5970-01-057-6698

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5970 - Electrical Insulators and Insulating Materials

(NIIN) National Item Identification Number

01-057-6698

Requires Demilitarization

Yes

(INC) Item Name Code

18296

Date

Fri, Mar 17, 1978

Schedule B Code

8546900000

Fifth Hole Spacing

0.215 inches nominal

First End Radius

0.234 inches nominal

First Hole Spacing

0.234 inches nominal

First Hole Diameter

0.166 inches nominal

First Side Radius

0.532 inches nominal

Fourth Hole Spacing

0.430 inches nominal

Overall Height

0.008 inches minimum and 0.012 inches maximum

Overall Length

1.655 inches nominal

Overall Width

1.063 inches nominal

Second Hole Spacing

0.522 inches nominal

Second Hole Diameter

0.050 inches nominal

Style Designator

flat, diamond

Third Hole Spacing

1.187 inches nominal

Material And Location

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0018296

Cross Reference

CAGE Codes

13103

Thermalloy Co Inc

U.s./canadian manufacturers

08289

The Delbert Blinn Co Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

53360

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

103300

Schedule B & Trade

Schedule B

8546-90-0000

Description

electrical insulators, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77324

(NAICS) North American Industrial Classification System

335932

Questions & Answers

1. What is the FSCG of the NSN 5970-01-057-6698?

   The FSCG of the NSN 5970-01-057-6698 is 5970

2. Does the NSN 5970-01-057-6698 have a Schedule B code assigned?

   Yes, the Schedule B code is 8546900000

3. Does NSN 5970-01-057-6698 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5970-01-057-6698 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5970-01-057-6698 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5970-01-057-6698 was assigned to the Federal Catalog?

   It was assigned 48 years ago, on Fri, Mar 17, 1978