NSN DPD2R35442

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

copper alloy single mating end all contact groupings contact material, nonremovable single mating end all contact groupings contact removability, jackscrew-socket connector locking method, 10.0 single mating end second contact grouping contact maximum current rating in amps, cable clamp connector cable strain relief method.

NSN 5935-00-817-5630 Datasheet

(NSN) National Stock Number

5935-00-817-5630

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-817-5630

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Tue, Jan 1, 1963

Schedule B Code

8536695050

Connector Cable Strain Relief Method

cable clamp

Connector Locking Method

jackscrew-socket

Contact Material

copper alloy single mating end all contact groupings

Contact Removability

nonremovable single mating end all contact groupings

Contact Maximum Current Rating In Amps

10.0 single mating end second contact grouping

Contact Maximum Current Rating In Amps

30.0 single mating end first contact grouping

Contact Position Arrangement Style

108 single mating end

Contact Surface Treatment

gold and silver single mating end all contact groupings

Included Contact Quantity

12 single mating end first contact grouping

Included Contact Quantity

96 single mating end second contact grouping

Included Contact Type

round pin single mating end all contact groupings

Insert Material

plastic silicone single mating end

Mating End Quantity

1

Nominal Thread Size

0.312 inches

Precious Material And Location

contact surfaces gold and contact surfaces silver

Precious Material And Weight

0.118 gold grains, troy and 0.118 silver grains, troy

Precious Material

gold and silver

Shell Surface Treatment Document And Classification

qq-p-416,ty 2,cl 3 fed spec single treatment response

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium

Shell Type

hood, side opening

Terminal Location

back single mating end all contact groupings

Thread Class

2a

Thread Direction

right-hand

Thread Quantity Per Inch

24

Thread Series Designator

unf

Threaded Device Type

coupling facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

C - Item contains combination of two or more precious metals (silver, gold, platinum).

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

97944

Mack Electronics Div Inc

U.s./canadian manufacturers

79500

Westinghouse Electric Corp

U.s./canadian manufacturers

97942

Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Northrop Grumman Systems Corporation Electronic Systems

U.s./canadian manufacturers

71468

Itt Cannon Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-00-817-5630?

   The FSCG of the NSN 5935-00-817-5630 is 5935

2. Does the NSN 5935-00-817-5630 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-00-817-5630 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-817-5630 contain precious materials?

   Item contains combination of two or more precious metals (silver, gold, platinum).

5. Does NSN 5935-00-817-5630 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-817-5630 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963