NSN DS00-27-13S-1-059

A washer, usually round, with a centrally-located hole. Its edges and two bearing surfaces are designed in such a way that applied pressure brings into play the spring tension and/or frictional locking principle that materially resists any tendency toward turning. It may be made of one or two pieces.

0.625 inches maximum cable entrance diameter, 0.968 inches nominal center to center distance between mounting facilities parallel to height, cable clamp connector cable strain relief method, 2.125 inches maximum body length, straight shape, external coupling strain relief body style.

NSN 5935-01-178-4266 Datasheet

(NSN) National Stock Number

5935-01-178-4266

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-178-4266

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Sat, May 5, 1984

Schedule B Code

8538907080

Body Length

2.125 inches maximum

Body Style

straight shape, external coupling strain relief

Cable Entrance Diameter

0.625 inches maximum

Center To Center Distance Between Mounting Facilities Parallel To Height

0.968 inches nominal

Connector Cable Strain Relief Method

cable clamp

Connector Locking Method

spring friction

Contact Material

unable to decode

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Maximum Current Rating In Amps

unable to decode

Contact Surface Treatment Document And Classification

unable to decode

Contact Surface Treatment

unable to decode

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.968 inches nominal

Distance From Mounting Shoulder To Front Face

0.531 inches maximum

Environmental Protection

corrosion resistant and humidity resistant and moisture resistant and shock resistant and vibration resistant

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Material

unable to decode

Insert Position In Deg

0.0

Mating End Quantity

1

Overall Height

1.281 inches maximum

Overall Width

1.281 inches maximum

Polarization Method

keyway or multiple keyway

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.015 gold grains, troy

Radio Frequency Type Contact Characteristic Impedance In Ohms

unable to decode

Shell Surface Treatment Document And Classification

qq-p-416,type 11,class 2 fed spec single treatment response

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium

Shell Type

solid

Terminal Location

unable to decode

Terminal Type

unable to decode

Unthreaded Mounting Hole Diameter

0.115 inches minimum and 0.125 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

11139

Te Connectivity Corporation Dba Tyco Electronics Corporation Div Deutsch Products

U.s./canadian manufacturers

26512

Northrop Grumman Systems Corporation Dba Northrop Grumman Is Div Mission Systems

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-178-4266?

   The FSCG of the NSN 5935-01-178-4266 is 5935

2. Does the NSN 5935-01-178-4266 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-178-4266 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-178-4266 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-178-4266 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-178-4266 was assigned to the Federal Catalog?

   It was assigned 42 years ago, on Sat, May 5, 1984