NSN DS07-37-30P-1-059

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

2.219 inches maximum body length, straight shape, internal coupling w/strain relief body style, cable clamp connector cable strain relief method, 0.750 inches maximum cable entrance diameter, friction connector locking method.

NSN 5935-01-225-1335 Datasheet

(NSN) National Stock Number

5935-01-225-1335

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-225-1335

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Wed, Jan 29, 1986

Schedule B Code

8536695050

Body Length

2.219 inches maximum

Body Style

straight shape, internal coupling w/strain relief

Cable Entrance Diameter

0.750 inches maximum

Connector Cable Strain Relief Method

cable clamp

Connector Locking Method

friction

Contact Material

copper alloy single mating end all contact groupings

Contact Removability

removable single mating end all contact groupings

Contact Surface Treatment Document And Classification

mil-g-45204 mil spec 1st treatment response and qq-s-365 fed spec 2nd treatment response single mating end all contact groupings

Contact Surface Treatment

gold and silver single mating end all contact groupings

Environmental Protection

shock resistant and vibration resistant and moisture resistant and humidity resistant

Included Contact Quantity

20 single mating end second contact grouping

Included Contact Quantity

4 single mating end first contact grouping

Included Contact Type

coaxial pin single mating end first contact grouping

Included Contact Type

round pin single mating end second contact grouping

Insert Material

rubber silicone class q single mating end

Insert Position In Deg

0.0

Mating End Quantity

1

Overall Diameter

1.875 inches nominal

Polarization Method

keyway or multiple keyway

Precious Material And Location

contact surfaces gold and contact surfaces silver

Precious Material

gold and silver

Precious Material And Weight

0.040 gold grains, troy and 0.040 silver grains, troy

Shell Surface Treatment Document And Classification

qq-p-416,ty ii,cl 2 fed spec all treatment responses

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium and chromate

Shell Type

solid

Special Features

insert configuration 37-30

Terminal Location

back single mating end all contact groupings

Terminal Type

crimp single mating end all contact groupings

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

C - Item contains combination of two or more precious metals (silver, gold, platinum).

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

11139

Te Connectivity Corporation Dba Tyco Electronics Corporation Div Deutsch Products

U.s./canadian manufacturers

26512

Northrop Grumman Systems Corporation Dba Northrop Grumman Is Div Mission Systems

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-01-225-1335?

   The FSCG of the NSN 5935-01-225-1335 is 5935

2. Does the NSN 5935-01-225-1335 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-01-225-1335 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-225-1335 contain precious materials?

   Item contains combination of two or more precious metals (silver, gold, platinum).

5. Does NSN 5935-01-225-1335 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-225-1335 was assigned to the Federal Catalog?

   It was assigned 40 years ago, on Wed, Jan 29, 1986