NSN E-1536

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

2.000 inches nominal body length, metal body material, 2.000 inches nominal body height, 0.453 inches nominal distance between centerlines of mounting facilities parallel to body width, 1.156 inches nominal body width.

NSN 5915-00-503-2215 Datasheet

(NSN) National Stock Number

5915-00-503-2215

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5915 - Filters and Networks

(NIIN) National Item Identification Number

00-503-2215

Requires Demilitarization

Yes

(INC) Item Name Code

00765

Date

Tue, Jan 1, 1963

Schedule B Code

8527995030

Body Height

2.000 inches nominal

Body Length

2.000 inches nominal

Body Material

metal

Body Width

1.156 inches nominal

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.453 inches nominal

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

0.750 inches nominal

Functional Terminal Type And Quantity

unable to decode

Inclosure Type

hermetically sealed

Load Impedance Per Function

50.0 ohms blank

Maximum Temp Rise

15.0 celsius

Mounting Facility Screw Thread Series Designator

unified national coarse (unc)

Mounting Facility Type And Quantity

3 threaded stud(s)

Nominal Thread Size

0.138 inches

Operating Current Rating Per Function In Amps

7.0 blank

Operating Voltage Rating And Type Per Function

130.0 volts ac blank and 500.0 volts dc blank

Operating Temp Range

-55.0 to 85.0 celsius

Overall Height

3.125 inches nominal

Power Line Frequency Rating Per Function In Hertz

1700.0 blank

Principal Circuitry Type Per Function

inductance-capacitance blank

Source Impedance Rating Per Function

50.0 ohms blank

Style Designator

rectangular terminal/terminals on opposite surfaces

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

Y - Indicates information is in the hazardous materials information resource system (hmirs).

Pseudo Item Name Code

0000765

Cross Reference

CAGE Codes

3B150

Raytheon Company Dba Raytheon Co

U.s./canadian manufacturers

49956

Raytheon Company Div Corp

U.s./canadian manufacturers

54X10

Raytheon Company

U.s./canadian manufacturers

13619

Ems Development Corporation Dba Ems Development Corp

U.s./canadian manufacturers

03538

Lockheed Martin Corporation Div Rms

U.s./canadian manufacturers

24446

General Electric Company

U.s./canadian manufacturers

24454

General Electric Co Electronic Components Division of Electronic Atomic and Defense Systems Group

U.s./canadian manufacturers

23160

Lindgren Rf Enclosures Inc Elmag Div

U.s./canadian manufacturers

81831

Filtron Co Inc Div of Rfi Corp

U.s./canadian manufacturers

80063

Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

58500

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061990

Schedule B & Trade

Schedule B

8527-99-5030

Description

reception apparatus, nesoi

End Use

41210 - Stereo equipment, etc.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76289

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5915-00-503-2215?

   The FSCG of the NSN 5915-00-503-2215 is 5915

2. Does the NSN 5915-00-503-2215 have a Schedule B code assigned?

   Yes, the Schedule B code is 8527995030

3. Does NSN 5915-00-503-2215 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5915-00-503-2215 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5915-00-503-2215 contain hazardous materials?

   Indicates information is in the hazardous materials information resource system (hmirs).

6. When the NSN 5915-00-503-2215 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963