1. Home /
  2. FSC NSN Catalog /
  3. Switches /
  4. E122A3A

NSN E122A3A

Rotary Switch

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

1.0 amperes resistive load and 500.0 milliamperes inductive load highest dc voltage rating at sea level contact load current rating, 5.0 amperes resistive load and 2.5 amperes inductive load lowest dc voltage rating at sea level contact load current rating, breaks before makes each section front contact switching action, 30.0 amperes resistive load and 3.0 amperes lamp load ac at sea level contact load current rating, contact load current rating.

NSN 5930-00-856-3856 Datasheet

(NSN) National Stock Number
5930-00-856-3856
(FSC) Federal Supply Classification
5930 - Switches
(NIIN) National Item Identification Number
00-856-3856
Requires Demilitarization
Yes
(INC) Item Name Code
02134
Date
Mon, Jan 1, 1962
Schedule B Code
8536509025
Contact Load Current Rating
Contact Load Current Rating
1.0 amperes resistive load and 500.0 milliamperes inductive load highest dc voltage rating at sea level
Contact Load Current Rating
30.0 amperes resistive load and 3.0 amperes lamp load ac at sea level
Contact Load Current Rating
5.0 amperes resistive load and 2.5 amperes inductive load lowest dc voltage rating at sea level
Contact Switching Action
breaks before makes each section front
Contact Voltage Rating In Volts
125.0 highest dc voltage rating at sea level
Contact Voltage Rating In Volts
125.0 ac at sea level
Contact Voltage Rating In Volts
30.0 lowest dc voltage rating at sea level
First Flat Length
0.500 inches nominal single actuator
Flat Height
0.210 inches nominal single actuator
Hazardous Locations/Environmental Protection
dustproof
Individual Section Quantity
2
Longest Horizontal Distance Between Mounting Centers
1.437 inches nominal single mounting facility
Longest Vertical Distance Between Mounting Centers
1.750 inches nominal single mounting facility
Mounting Facility Pattern
four position rectangular single mounting facility
Mounting Method
threaded bushing single mounting facility
Overall Diameter
2.000 inches nominal
Overall Length
2.405 inches nominal
Pole Quantity
2 each section front
Shaft Diameter
0.250 inches nominal single actuator
Shaft Type
round, flatted single actuator
Shaft Length
0.937 inches nominal single actuator
Style Designator
tap, circular, bushing mount
Switch Actuator Indexing Position Quantity
2 single actuator
Switch Actuator Positioning Increment
45.0 degrees single actuator
Switch Contact Basic Design
nonpile-up symmetrical
Terminal Type
tab w/screw
Throw Quantity
2 each section front
Unthreaded Mounting Hole Diameter
0.188 inches nominal single mounting facility

Identification

Demilitarization Code
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Precious Metals Indicator
U - Precious metal content is unknown
Hazardous Metals Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Pseudo Item Name Code
0002134

Cross Reference

CAGE Codes

10001
Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier
U.s./canadian manufacturers
82121
Electro Switch Corp. Dba Electro Switch Corp
U.s./canadian manufacturers

Freight Information

Air Commodity
HZ -
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
National Motor Freight Class Rating
M - 85.0
Special Handling
9 - Other or no special handling required (sh)
Type of Cargo
Z - No special type of cargo code applicable
Uniform Freight Classification Item Number
34430
Water Commodity
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
National Motor Freight Classification Item Number
061360

Schedule B & Trade

Schedule B
8536-50-9025
Description
switches, rotary, rated at over 5 a, for a voltage not exceeding 1,000 volts
End Use
20005 - Electric apparatus
Unit of Quantity
NO
USDA
Yes
(SITC) Standard International Trade Classification
77255
(NAICS) North American Industrial Classification System
335931

Questions & Answers

  1. What is the FSCG of the NSN 5930-00-856-3856?

    The FSCG of the NSN 5930-00-856-3856 is 5930

  2. Does the NSN 5930-00-856-3856 have a Schedule B code assigned?

    Yes, the Schedule B code is 8536509025

  3. Does NSN 5930-00-856-3856 require demilitarization?

    Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

  4. Does NSN 5930-00-856-3856 contain precious materials?

    Precious metal content is unknown

  5. Does NSN 5930-00-856-3856 contain hazardous materials?

    Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

  6. When the NSN 5930-00-856-3856 was assigned to the Federal Catalog?

    It was assigned 64 years ago, on Mon, Jan 1, 1962

Globe Transparent
Get in Touch
Looking for technical parts, product details, or custom project planning? Our team has you covered with end-to-end support every step of the way.
Contact Us

Pricing & Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.