NSN EA995T2

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

1.560 inches nominal body height, unable to decode center to center distance between mounting facilities parallel to length, unable to decode center to center distance between mounting facilities parallel to width, 1.570 inches nominal body width, 1.950 inches nominal body length.

NSN 5950-01-169-0025 Datasheet

(NSN) National Stock Number

5950-01-169-0025

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

01-169-0025

Requires Demilitarization

Yes

(INC) Item Name Code

32496

Date

Fri, Dec 30, 1983

Schedule B Code

8504314065

Body Height

1.560 inches nominal

Body Length

1.950 inches nominal

Body Width

1.570 inches nominal

Center To Center Distance Between Mounting Facilities Parallel To Width

unable to decode

Center To Center Distance Between Mounting Facilities Parallel To Length

unable to decode

Frequency Rating

Inclosure Type

fully inclosed

Input-Output Phase Relationship

unable to decode

Maximum Operating Temp

130.0 celsius

Maximum Transformer Power Rating

unable to decode

Mounting Facility Quantity

unable to decode

Mounting Hole Diameter

unable to decode

Mounting Method

unable to decode

Reliability Indicator

not established

Terminal Type And Quantity

10 pin

Winding Function And Quantity

Winding Operating Current

unable to decode

Winding Operating Voltage

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0032496

Cross Reference

CAGE Codes

82227

Vdo Control Systems Inc

U.s./canadian manufacturers

09349

Magnetic Circuit Elements Inc Dba Magnetic Circuit Elements Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Schedule B & Trade

Schedule B

8504-31-4065

Description

transformers, having a power handling capacity 40 va or greater but less than 1 kva, nesoi

End Use

20000 - Generators, accessories

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77119

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5950-01-169-0025?

   The FSCG of the NSN 5950-01-169-0025 is 5950

2. Does the NSN 5950-01-169-0025 have a Schedule B code assigned?

   Yes, the Schedule B code is 8504314065

3. Does NSN 5950-01-169-0025 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-01-169-0025 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5950-01-169-0025 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-01-169-0025 was assigned to the Federal Catalog?

   It was assigned 42 years ago, on Fri, Dec 30, 1983