NSN ECEA1HU331

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

aluminum capacitive electrode material, 0.787 inches nominal body length, etched foil anode type, 0.394 inches nominal body diameter, w/o mtg facilities, terminal(s) on one end body style.

NSN 5910-01-234-0102 Datasheet

(NSN) National Stock Number

5910-01-234-0102

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-234-0102

Requires Demilitarization

Yes

(INC) Item Name Code

00008

Date

Fri, Jun 6, 1986

Schedule B Code

8532290040

Anode Type

etched foil

Body Diameter

0.394 inches nominal

Body Length

0.787 inches nominal

Body Style

w/o mtg facilities, terminal(s) on one end

Capacitive Electrode Material

aluminum

Capacitance Value Per Section

330.000 microfarads single section

Center To Center Distance Between Terminals Parallel To Diameter

0.197 inches nominal

Dc Leakage At Reference Temp

165.000 microamperes

Electrical Polarization

polarized

Equivalent Series Resistance At Reference Temp In Ohms

0.15

Impedance At Minimum Operating Temp In Ohms

2.5

Nonderated Operating Temp

-40.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

50.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Diameter

0.024 inches nominal

Terminal Length

0.590 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Range Per Section

-20.00 to 20.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000008

Cross Reference

CAGE Codes

54473

Matsushita Electric Corp of America M/s 7h-4

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-234-0102?

   The FSCG of the NSN 5910-01-234-0102 is 5910

2. Does the NSN 5910-01-234-0102 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-234-0102 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-234-0102 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-01-234-0102 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-234-0102 was assigned to the Federal Catalog?

   It was assigned 40 years ago, on Fri, Jun 6, 1986