NSN ED3200

A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see bushing, nonmetallic. See also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. Excludes:bushing, drill, jig.

multipole-single actuator type body style, 4.130 inches nominal body width, hemp endurable power system end item identification, 3.380 inches nominal body height, 6.000 inches nominal body length.

NSN 5925-01-547-2880 Datasheet

(NSN) National Stock Number

5925-01-547-2880

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

01-547-2880

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Wed, Jan 17, 2007

Schedule B Code

8536200040

End Item Identification

hemp endurable power system

Body Height

3.380 inches nominal

Body Length

6.000 inches nominal

Body Style

multipole-single actuator type

Body Width

4.130 inches nominal

Boss Height

0.125 inches nominal

Center To Center Distance Between Terminals Parallel To Length

5.062 inches nominal

Center To Center Distance Between Terminals Parallel To Width

1.375 inches nominal

Circuit Protection Type

overcurrent all locations

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

4.500 inches nominal

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.375 inches nominal

Frequency In Hertz

60.0 or 50.0 all locations

Main Contact Tripping Mechanism Type

nontrip free

Material

plastic case

Part Name Assigned By Controlling Agency

molded case circuit breaker f-frame, 10-225 amp, type ed

Maximum Continuous Load Current Rating Per Pole

300.0 amperes ac all locations

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

65000.0 ac all locations

Mounting Facility Type And Quantity

4 unthreaded hole(s)

Operating Voltage Type And Rating Per Pole In Volts

240.0 ac and 125.0 dc all locations

Pole Quantity

3

Reset Method

manual

Special Features

sealed with non-interchangable trip units; suitable for reverse feed use; includes terminals on load end only

Terminal Type And Quantity

3 screw

Trip Release Ambient Temp Rating

40.0 celsius nominal all locations

Trip Release Method

thermal-magnetic all locations

Unthreaded Mounting Hole Diameter

0.164 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

81118

Eaton Corporation

U.s./canadian manufacturers

89946

Eaton Corporation Dba Eaton Inoac

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-01-547-2880?

   The FSCG of the NSN 5925-01-547-2880 is 5925

2. Does the NSN 5925-01-547-2880 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-01-547-2880 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-01-547-2880 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-01-547-2880 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-01-547-2880 was assigned to the Federal Catalog?

   It was assigned 19 years ago, on Wed, Jan 17, 2007