NSN EHB3015

A washer of any peripheral shape having a centrally located hole. Both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. The thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. The maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. Excludes:washer, concave, retainer, packing, and thrust type washers. See also spacer, sleeve; and spacer, stepped.

6.000 inches nominal body length, multipole-single actuator type body style, 3.375 inches nominal body height, trip-reset actuator function, at pole two actuator position designation.

NSN 5925-00-232-2840 Datasheet

(NSN) National Stock Number

5925-00-232-2840

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

00-232-2840

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Wed, Oct 28, 1970

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

at pole two

Body Height

3.375 inches nominal

Body Length

6.000 inches nominal

Body Style

multipole-single actuator type

Body Width

4.125 inches nominal

Boss Height

0.125 inches nominal

Center To Center Distance Between Terminals Parallel To Length

4.500 inches nominal

Center To Center Distance Between Terminals Parallel To Width

1.000 inches nominal

Circuit Protection Type

overcurrent all locations

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

4.000 inches nominal

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.000 inches nominal

Frequency In Hertz

60.0 all locations

Inclosure Protection Type For Which Designed

corrosion resistant

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

1 toggle

Material

plastic case

Maximum Continuous Load Current Rating Per Pole

15.0 amperes ac all locations

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

14000.0 ac all locations

Mounting Facility Type And Quantity

4 unthreaded hole(s)

Operating Voltage Type And Rating Per Pole In Volts

480.0 ac all locations

Pole Quantity

3

Reset Method

manual

Special Handling Feature

magnetic

Specification/Standard Data

81348-w-c-375/18 government specification

Storage Type

general purpose warehouse

Terminal Type And Quantity

6 compression

Test Data Document

"81348-w-c-375 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Trip Release Ambient Temp Rating

40.0 celsius nominal all locations

Trip Release Characteristic

time delay all locations

Trip Release Method

thermal-magnetic all locations

Trip Delay Time In Seconds Per Rated Continuous Current

2.000 maximum at 200 pct all locations

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

135.0 all locations

Unthreaded Mounting Hole Diameter

0.188 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

89946

Eaton Corporation Dba Eaton Inoac

Non-manufacturers

0006F

Hanil Clothing Co., Ltd.

Non-us manufacturer (nato), other foreign organization or codification bureaus

81348

Federal Specifications Promulgated by General Services Administration Washington Dc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-00-232-2840?

   The FSCG of the NSN 5925-00-232-2840 is 5925

2. Does the NSN 5925-00-232-2840 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-00-232-2840 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-00-232-2840 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-00-232-2840 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-00-232-2840 was assigned to the Federal Catalog?

   It was assigned 55 years ago, on Wed, Oct 28, 1970