NSN ES4041

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

straight shape, external coupling body style, externally threaded shell connector locking method, natural color, copper alloy single mating end single contact grouping contact material, aircraft, galaxy c-5 end item identification.

NSN 5935-01-270-6094 Datasheet

(NSN) National Stock Number

5935-01-270-6094

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-270-6094

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Mon, Jan 11, 1988

Schedule B Code

8536695050

End Item Identification

aircraft, galaxy c-5

Body Style

straight shape, external coupling

Color

natural

Connector Locking Method

externally threaded shell

Contact Material

copper alloy single mating end single contact grouping

Contact Removability

nonremovable single mating end single contact grouping

Contact Position Arrangement Style

22-6 single mating end

Contact Surface Treatment Document And Classification

mil-g-45204 mil spec single treatment response single mating end single contact grouping

Contact Surface Treatment

gold single mating end single contact grouping

Criticality Code Justification

feat

Included Contact Quantity

3 single mating end single contact grouping

Included Contact Type

round pin single mating end single contact grouping

Insert Material

plastic single mating end

Insert Position In Deg

0.0

Mating End Quantity

1

Nominal Thread Length

0.375 inches

Nominal Thread Size

0.625 inches

Overall Length

1.084 inches nominal

Polarization Method

keyway or multiple keyway

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.015 gold grains, troy

Shell Material Document And Classification

qq-s-764 fed spec single material response

Shell Material

steel corrosion resisting

Shell Type

solid

Special Features

weapon system essential

Terminal Location

back single mating end single contact grouping

Terminal Type

solder well single mating end single contact grouping

Thread Class

2a

Thread Direction

right-hand

Thread Quantity Per Inch

24

Thread Series Designator

unef

Threaded Device Type

coupling facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

12349

Enviro-Seal Inc Dba Electronic Seals Co

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-01-270-6094?

   The FSCG of the NSN 5935-01-270-6094 is 5935

2. Does the NSN 5935-01-270-6094 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-01-270-6094 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-270-6094 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-270-6094 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-270-6094 was assigned to the Federal Catalog?

   It was assigned 38 years ago, on Mon, Jan 11, 1988