NSN EYS-2

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

unable to decode item accommodated trade size, standard style designator, pipe plug filler head opening type, aluminum-copper free material.

NSN 5975-01-369-6957 Datasheet

(NSN) National Stock Number

5975-01-369-6957

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5975 - Electrical Hardware and Supplies

(NIIN) National Item Identification Number

01-369-6957

Requires Demilitarization

Yes

(INC) Item Name Code

06936

Date

Sat, Jan 2, 1993

Schedule B Code

7609000000

Filler Head Opening Type

pipe plug

Item Accommodated Trade Size

unable to decode

Material

aluminum-copper free

Style Designator

standard

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0006936

Cross Reference

CAGE Codes

75282

Killark Electric Mfg Co

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

S - 60.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

29380

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

050965

Schedule B & Trade

Schedule B

7609-00-0000

Description

aluminum tube or pipe fittings (couplings,elbows sleeves)

End Use

12300 - Finished metal shapes

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

68427

(NAICS) North American Industrial Classification System

332996

Questions & Answers

1. What is the FSCG of the NSN 5975-01-369-6957?

   The FSCG of the NSN 5975-01-369-6957 is 5975

2. Does the NSN 5975-01-369-6957 have a Schedule B code assigned?

   Yes, the Schedule B code is 7609000000

3. Does NSN 5975-01-369-6957 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5975-01-369-6957 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5975-01-369-6957 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5975-01-369-6957 was assigned to the Federal Catalog?

   It was assigned 33 years ago, on Sat, Jan 2, 1993