NSN F62UA

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

100.000 feet nominal length, black and white emulsion type, roll usage form, negative reproduction type, silver precious material.

NSN 6750-01-421-2127 Datasheet

(NSN) National Stock Number

6750-01-421-2127

(FSG) Federal Supply Group

67 - Photographic Equipment

(FSC) Federal Supply Classification

6750 - Photographic Supplies

(NIIN) National Item Identification Number

01-421-2127

Requires Demilitarization

Yes

(INC) Item Name Code

30432

Date

Fri, Nov 3, 1995

Schedule B Code

9010100000

Emulsion Type

black and white

Length

100.000 feet nominal

Precious Material

silver

Reproduction Type

negative

Usage Form

roll

Width

42.000 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0030432

Cross Reference

CAGE Codes

1BB84

Bayer Corp Agfa Div Electronic Imaging/ Photographic Supplies

U.s./canadian manufacturers

Freight Information

Air Commodity

PZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

J - 100.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

H - Subject to damage from heat

Uniform Freight Classification Item Number

19845

Water Commodity

759 - Film and photo paper, other than motion picture (see 716 and 717)

National Motor Freight Classification Item Number

039655

Schedule B & Trade

Schedule B

9010-10-0000

Description

apparatus & equipment, automatically developing photographic film/paper in rolls, automatically exposing developing film to roll of photographic paper

End Use

21190 - Photo, service industry machinery

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

88135

(NAICS) North American Industrial Classification System

333310

Questions & Answers

1. What is the FSCG of the NSN 6750-01-421-2127?

   The FSCG of the NSN 6750-01-421-2127 is 6750

2. Does the NSN 6750-01-421-2127 have a Schedule B code assigned?

   Yes, the Schedule B code is 9010100000

3. Does NSN 6750-01-421-2127 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6750-01-421-2127 contain precious materials?

   Item contains silver.

5. Does NSN 6750-01-421-2127 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6750-01-421-2127 was assigned to the Federal Catalog?

   It was assigned 30 years ago, on Fri, Nov 3, 1995