1. Home /
  2. FSC NSN Catalog /
  3. Electric Portable and Hand Lighting Equipment /
  4. FIREFLY 3

NSN FIREFLY 3

Distress Marker Light

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

1 xenon lamp type accommodated and quantity, rotating light beam motion, rescue strobe part name assigned by controlling agency, base mounting method, unable to decode material.

NSN 6230-01-534-6680 Datasheet

(NSN) National Stock Number
6230-01-534-6680
(FSG) Federal Supply Group
62 - Lighting Fixtures and Lamps
(FSC) Federal Supply Classification
6230 - Electric Portable and Hand Lighting Equipment
(NIIN) National Item Identification Number
01-534-6680
Requires Demilitarization
Yes
(INC) Item Name Code
13510
Date
Fri, Oct 28, 2005
Schedule B Code
9405400000
Lamp Type Accommodated And Quantity
1 xenon
Light Beam Motion
rotating
Part Name Assigned By Controlling Agency
rescue strobe
Material
unable to decode
Mounting Method
base
Overall Depth
1.100 inches nominal
Overall Length
4.400 inches nominal
Overall Width
2.200 inches nominal
Shape
rectangular

Identification

Demilitarization Code
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Precious Metals Indicator
A - Item does not contain precious metal.
Hazardous Metals Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Pseudo Item Name Code
0013510

Cross Reference

CAGE Codes

18560
Acr Electronics, Inc. Dba Acr Electronics Inc
U.s./canadian manufacturers

Freight Information

Air Commodity
HZ -
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
National Motor Freight Class Rating
H - 110.0
Special Handling
9 - Other or no special handling required (sh)
Type of Cargo
Z - No special type of cargo code applicable
Uniform Freight Classification Item Number
56020
Water Commodity
761 - Electric lamps
National Motor Freight Classification Item Number
109800

Questions & Answers

  1. What is the FSCG of the NSN 6230-01-534-6680?

    The FSCG of the NSN 6230-01-534-6680 is 6230

  2. Does the NSN 6230-01-534-6680 have a Schedule B code assigned?

    Yes, the Schedule B code is 9405400000

  3. Does NSN 6230-01-534-6680 require demilitarization?

    Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

  4. Does NSN 6230-01-534-6680 contain precious materials?

    Item does not contain precious metal.

  5. Does NSN 6230-01-534-6680 contain hazardous materials?

    Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

  6. When the NSN 6230-01-534-6680 was assigned to the Federal Catalog?

    It was assigned 20 years ago, on Fri, Oct 28, 2005

Globe Transparent
Get in Touch
Looking for technical parts, product details, or custom project planning? Our team has you covered with end-to-end support every step of the way.
Contact Us

Pricing & Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.