NSN FKAP-24S

A clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see clamp, hose, special-shaped. Excludes:clamp, electrical; clamp, loop; clamp, fire hose, shutoff; ferrule (as modified); and hand screw.

7010-01-333-0711 computer system,digital end item identification, jackscrew-socket connector locking method, straight shape w/screw locks body style, copper alloy single mating end single contact grouping contact material, qq-c-530 fed spec single material response single mating end single contact grouping contact material document and classification.

NSN 5935-01-349-3121 Datasheet

(NSN) National Stock Number

5935-01-349-3121

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-349-3121

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Sat, Nov 23, 1991

Schedule B Code

8536695050

End Item Identification

7010-01-333-0711 computer system,digital

Body Style

straight shape w/screw locks

Connector Locking Method

jackscrew-socket

Contact Material Document And Classification

qq-c-530 fed spec single material response single mating end single contact grouping

Contact Material

copper alloy single mating end single contact grouping

Contact Removability

removable single mating end single contact grouping

Contact Maximum Current Rating In Amps

5.0 single mating end single contact grouping

Contact Position Arrangement Style

2 rows of contacts non-inserted board single mating end

Contact Surface Treatment Document And Classification

mil-g-45204,type ii,grade c,class 1 mil spec 1st treatment response single mating end single contact grouping

Contact Surface Treatment

gold and nickel single mating end single contact grouping

Environmental Protection

vibration resistant and salt water resistant and corrosion resistant and humidity resistant

Included Contact Quantity

24 single mating end single contact grouping

Included Contact Type

round pin single mating end single contact grouping

Insert Material Document And Classification

mil-m-14,type sdg-f mil spec 1st material response or mil-p-46174 mil spec 2nd material response single mating end

Insert Material

plastic diallyl phthalate glass filled or plastic polyphenylene single mating end

Mating End Quantity

1

Nominal Thread Size

0.086 inches

Operating Temp Rating

-65.0 celsius minimum and 125.0 celsius maximum

Overall Height

0.915 inches nominal

Overall Length

1.350 inches nominal

Overall Width

0.250 inches nominal

Polarization Method

jackscrew

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.024 gold grains, troy

Terminal Location

back single mating end single contact grouping

Terminal Type

printed circuit single mating end single contact grouping

Thread Class

2a and 2b

Thread Direction

right-hand

Thread Series Designator

unified national coarse (unc)

Threaded Device Type

coupling facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

59350

Incon Inc Dba Incon Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-01-349-3121?

   The FSCG of the NSN 5935-01-349-3121 is 5935

2. Does the NSN 5935-01-349-3121 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-01-349-3121 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-349-3121 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-349-3121 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-349-3121 was assigned to the Federal Catalog?

   It was assigned 34 years ago, on Sat, Nov 23, 1991