NSN FL83CW1ED3

A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.

3.620 inches maximum body length, tin body surface treatment, unable to decode functional terminal type and quantity, 1.145 inches maximum body outside diameter, metal body material.

NSN 5915-01-067-9792 Datasheet

(NSN) National Stock Number

5915-01-067-9792

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5915 - Filters and Networks

(NIIN) National Item Identification Number

01-067-9792

Requires Demilitarization

Yes

(INC) Item Name Code

00765

Date

Sun, Nov 12, 1978

Schedule B Code

8527995030

Body Length

3.620 inches maximum

Body Material

metal

Body Outside Diameter

1.145 inches maximum

Body Surface Treatment

tin

Functional Terminal Type And Quantity

unable to decode

Inclosure Type

encased

Load Impedance Per Function

50.0 ohms blank

Maximum Temp Rise

25.0 celsius

Maximum Voltage Drop Per Function

0.5 volts ac blank

Mounting Facility Screw Thread Series Designator

unef

Mounting Facility Type And Quantity

1 threaded bushing

Nominal Thread Size

0.438 inches

Operating Current Rating Per Function In Amps

0.5 blank

Operating Voltage Rating And Type Per Function

250.0 volts ac blank and 600.0 volts dc blank

Operating Temp Range

-55.0 to 125.0 celsius

Overall Length

4.830 inches maximum

Power Line Frequency Rating Per Function In Hertz

400.0 blank

Source Impedance Rating Per Function

50.0 ohms blank

Specification/Standard Data

81349-mil-f-15733/31 government specification

Style Designator

round terminal/terminals on opposite surfaces

Test Data Document

"81349-mil-f-15733 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Vibration Resistance Range In Hertz

+10.0 to 2000.0

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000765

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

58500

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061990

Schedule B & Trade

Schedule B

8527-99-5030

Description

reception apparatus, nesoi

End Use

41210 - Stereo equipment, etc.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76289

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5915-01-067-9792?

   The FSCG of the NSN 5915-01-067-9792 is 5915

2. Does the NSN 5915-01-067-9792 have a Schedule B code assigned?

   Yes, the Schedule B code is 8527995030

3. Does NSN 5915-01-067-9792 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 5915-01-067-9792 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5915-01-067-9792 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5915-01-067-9792 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Sun, Nov 12, 1978