NSN G81S01351-9

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

fighter aircraft f14; nha accessory set,interface device. end item identification, agav criticality code justification.

NSN 5935-01-480-1981 Datasheet

(NSN) National Stock Number

5935-01-480-1981

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-480-1981

Requires Demilitarization

Yes

(INC) Item Name Code

15094

Date

Thu, Nov 9, 2000

Schedule B Code

8548900100

End Item Identification

fighter aircraft f14; nha accessory set,interface device.

Criticality Code Justification

agav

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015094

Cross Reference

CAGE Codes

0ZX06

Grumman Aerospace Corp

U.s./canadian manufacturers

26512

Northrop Grumman Systems Corporation Dba Northrop Grumman Is Div Mission Systems

U.s./canadian manufacturers

61174

Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Northrop Grumman Aeronautics Systems

Non-manufacturers

79RG9

Northrop Grumman Systems Corporation

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5935-01-480-1981?

   The FSCG of the NSN 5935-01-480-1981 is 5935

2. Does the NSN 5935-01-480-1981 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-01-480-1981 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 5935-01-480-1981 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5935-01-480-1981 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-480-1981 was assigned to the Federal Catalog?

   It was assigned 25 years ago, on Thu, Nov 9, 2000