NSN G8627-105T

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

90.0 body angle in deg, 0.500 inches minimum and 0.625 inches maximum cable opening diameter, gland nut and retaining ring furnished items, 1 cable opening quantity, aluminum alloy material.

NSN 5935-01-044-8812 Datasheet

(NSN) National Stock Number

5935-01-044-8812

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-044-8812

Requires Demilitarization

Yes

(INC) Item Name Code

67169

Date

Fri, Jul 22, 1977

Schedule B Code

8548900100

Body Angle In Deg

90.0

Cable Opening Diameter

0.500 inches minimum and 0.625 inches maximum

Cable Opening Quantity

1

Furnished Items

gland nut and retaining ring

Material

aluminum alloy

Mounting Facility Type And Quantity

1 threaded coupling

Nominal Thread Size

0.625 inches

Overall Height

1.463 inches nominal

Overall Width

0.676 inches nominal

Size Designation

10

Style Designator

angle type

Surface Treatment

cadmium

Thread Class

2b

Thread Direction

right-hand

Thread Quantity Per Inch

28

Thread Series Designator

un

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0067169

Cross Reference

CAGE Codes

06324

Glenair, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

743 - Electrical cable

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5935-01-044-8812?

   The FSCG of the NSN 5935-01-044-8812 is 5935

2. Does the NSN 5935-01-044-8812 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-01-044-8812 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-044-8812 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-01-044-8812 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-044-8812 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Fri, Jul 22, 1977